Mraverage
New Member
- Region
- United Kingdom
I have the Homage and Thule Easyfold 932 and I load it exactly as per your photo (the only way it will fit on in fact), but it has concerned me each time I use it because the grip is weak, due to the height of the rail that holds the bike holder arm being about 80mm below the lowest position that you can clamp the bike at on the seat stem, does anyone else find this a concern? I have been considering upgrading to the Easyfold 934 carrier, where the rail carrying the arm is almsot 100mm taller. With a taller rail, the jaws of the holding arm will meet the frame more squarely, meaning the jaw will get a much fuller grip on the frame (at all four edges of the clam grip), instead of just two edges due to the angle of approach, if you get my drift? If you look at my photo you will see that the jaw is about 5mm away from the frame when fully tightened, the same is true for the opposing bottom jaw, not good.Picked the bikes up from Kelly at Citrus Cycle. Took a quick test ride and now waiting for the ferry. The Nevo and Homage were a very tight fit on the Thule but it works okay
Love the power of the Gen 4 motor - noticeable difference
Glad I ordered the comfort bars. I am an old geezer and the upright riding position suits my back and neck
The X5 is new too so we are doing our bit to support the German economy.....
I’ll post more feedback after a few more rides
Attachments
Last edited: