New EBR Review - e-Rad/Bafang (Lectric Cycles)

[Chris Head]

Chris, I saving up for the 750W 48V eRad kit, my bike has hydraulic disc brakes, how will the eRad front brake lever/cutoff work in place of my front hydraulic disc brake lever?

We have universal brake sensors that will work with the hydro brakes. We have a new inline hydro brake sensor coming soon as well

 

[SoCal Joe]

We have universal brake sensors that will work with the hydro brakes. We have a new inline hydro brake sensor coming soon as well

I use 160mm crank arms on all my bike, can you sub 160s for the 170 included in the kit?

 

[Chris Head]

I use 160mm crank arms on all my bike, can you sub 160s for the 170 included in the kit?

We only have 170mm. http://www.bikesmithdesign.com/Short_Cranks/ These guys do custom length by cutting cranks down. We are bringing in a new crank soon as well. We may add some sizes

 

[SoCal Joe]

We only have 170mm. http://www.bikesmithdesign.com/Short_Cranks/ These guys do custom length by cutting cranks down. We are bringing in a new crank soon as well. We may add some sizes

Could these be adapter to the kit? http://www.ebay.com/itm/291074633899?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[Chris Head]

Could these be adapter to the kit? http://www.ebay.com/itm/291074633899?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT

No. You need square taper crank arms with no spider

 

[SoCal Joe]

No. You need square taper crank arms with no spider

No. You need square taper crank arms with no spider

What is the eta on the new crank and inline hydro brake sensor, you mentioned?

 

[Chris Head]

Most likely sometime in November

 

[SoCal Joe]

Most likely sometime in November

I'm excited about getting the 750/48 kit installed, I'm going to plan a road trip to Lectric Cycle and have installed there! That's all for now, thanks for your time!

 

[Chris Head]

I'm excited about getting the 750/48 kit installed, I'm going to plan a road trip to Lectric Cycle and have installed there! That's all for now, thanks for your time!

Thanks Joe. We will be in San Diego for Turbo Bob's Intro to the Electric Bicycle next Tuesday at the SDG&E Center. If you are in the area come see us.
https://turbobobbicycleblog.wordpre...-introduction-to-electric-bicycles-fall-2015/

 

[Chris Head]

Great Vid! Keep it up!
@Chris Head Is there an adaptor for the Gates Carbon Belt drive? Also, how does a mid drive work with a 3 speed IGH bike? My bicycle is a Priority Bicycle.

We have had some success recently with belt drives! If you are still interested get in touch. [email protected] 480 382 0665

 

[Chris Head]

Given that the legal limit in Europe is 250w and that the market there is currently far larger than the U.S. I don't think they are losing sleep over it.

Chris, I saving up for the 750W 48V eRad kit, my bike has hydraulic disc brakes, how will the eRad front brake lever/cutoff work in place of my front hydraulic disc brake lever?

We have universal sensors for Hydro brakes. We have sensors for the levers and we have inline sensors coming soon

 

[Chris Head]

WE HAVE HAD RECENT SUCCESS WITH BELT DRIVES!
The key is the center lock belt/pulley. Contact us if you are interested. chris@lectriccycles 480 382 0665

 

[Ravi Kempaiah]

WE HAVE HAD RECENT SUCCESS WITH BELT DRIVES!
The key is the center lock belt/pulley. Contact us if you are interested. chris@lectriccycles 480 382 0665

Beautiful graphics.
Pair it up with a nice slim 48V 14Ah battery and that bike would be a killer commuter.

 

[Chris Head]

Heck Yeah. The battery in the pic is temporary. It will have the new battery soon

 

[GMS]

Chris will Lectriccycles have any plans to sell the belt drive bike as a finished product or (maybe of more interest) the center lock belt/pulley interface to the Bafang mid-drive?

 

[Chris Head]

Chris will Lectriccycles have any plans to sell the belt drive bike as a finished product or (maybe of more interest) the center lock belt/pulley interface to the Bafang mid-drive?

Our adapters already work with the Gates pulleys as is (130 bcd) We can source the Spot Bikes if you wanted us to do a complete build for you. Give me a call and will be happy to discuss your options 480 382 0665