Not sure if you saw my comment on here... use the plastic piece inside the box as a spacer on the side of the battery between the battery in the frame...works great... why wrap up the fender bracket all you need is a nylon washer in between
They don't have aluminum fenders either I just checked not a big deal though
The KevCentral reviews are the best in my opinion. Two well explained videos.
Where am I putting this nylon washer?
Between the bracket and the fender or you could use a piece of innertube sandwiched between the bracket and fender... which would work really well... if you cut it to the size of the little bracket you wouldn't have to use that tape...just my thoughts..
Not sure a washer would stay in place
Does your bike have a stand for when the bike is folded, the prototypes don't, also the prototypes have a 48 tooth crank on the front and the production ones are supposed to have 52.
It has the stand but apparently the crank have 48 tooth. I just counted it manually. Don't know how find that out in another way.
sounds like a production model not a prototype, and not really sure about the 52 tooth crank set, have not gotten mine yet, maybe Darceman can fill us in on this a little more, is yours a 52 tooth?
The prototypes I have seen in the many YouTube videos had three pedal assist levels. It looked like they were doing OK with just those three levels. I will find out when my bike arrives. I try to watch all the XP videos I can, as well as read the great posts on this forum. I've already read the new operators manual from cover to cover. ANYTHING to kill the time while waiting -- I am in the current Late August group. I do agree with a lot of the comments on here about Lectric Ebikes as a great, but not perfect. They come across as a group of smart people who operate with integrity and friendliness. No CYA with these guys, they seem to be learning as they go, something a lot of small operations have to do. Beyond them, judging from the comments on here, it looks like a nice community of enthusiasts are growing around this particular product. Signing off, I need to check my email for the millionth time to see if there is anything from Lectric!
The washer goes on the small bolts...
It was the first KevCentral review that convinced me to go for this bike.
Same here.
I'll give that a try.
Just counted ours are 52 tooth....
Again, thank you Mr. Darceman, but, maybe sorry Pretor, I would contact Lectric and let them know Pretor.
I was kind of glad, aluminum will propably bend easier and I will be hauling these in the back of a pickup.
I agree...
How about some Thin peel and stick foam insulation stuck to the battery itself.
I think two well-placed peel and stick rubber dots would solve the rattle issues and look better as well.
