Which cassette tool? FR-5, FR-5g, or FR-1.2, NeoJumper

[Mtnm]

I'm unsure of which is the correct Cassette Removal tool to order for my NeoJumper.

Shimano type:
FR-5 12 spline, 23.4 mm
FR-5, 12 spline, 23.4 mm with guide pin
FR-1.2 12 spline, 23 mm

Any advice is much appreciated.

Mike
Colorado, USA

 

[Shea N Encinitas]

I'm pretty sure I have the middle one W the guide pin, has worked on 6 different bikes since I bought it years back. If you can, take the wheel to the bike shop just ask and test fit the tool. -S

 

[Ravi Kempaiah]

I'm unsure of which is the correct Cassette Removal tool to order for my NeoJumper.

Shimano type:
FR-5 12 spline, 23.4 mm
FR-5, 12 spline, 23.4 mm with guide pin
FR-1.2 12 spline, 23 mm

Any advice is much appreciated.

Mike
Colorado, USA

Contact [email protected]

He is the tech guy and quite knowledgeable. When I had a doubt, he was kind enough to go to warehouse and take a video for me. Very helpful.

Before ordering these tools, you might want to contact your LBS because for them it's very routine and a tune up generally involves cleaning of the cassette. They can certainly fix this up.

 

[Mtnm]

Thank you for the suggestions.
My "local" bike shop is 50 miles away, so you can guess I end up trying to figure out most things on-line and doing it myself.

 

[Mtnm]

e-motion indicates the tool without the guide pin should work (so the Park FR-5 should be OK).
They do recommend going with the Pedro tool.

 

[Chris Nolte]

Park FR-5 is the one. It's standard for Shimano Cassette's