pushkar
Well-Known Member
Hey everyone. We just got the step through build done. Here are some initial pictures. Please note - we are evaluating the frame only at this point.
Here are some key takeaways to focus on.
Here are some key takeaways to focus on.
- We will paint it with prismatic colors and put actual decals on it here in Boston. Please ignore the paint, tires, brake rotor size on these pictures.
- We can only do a 14Ah battery pack on the step-through frame. We have gone through 2 sets of stress / strength / certification tests on the step-through and we ran into a couple of issues with the original 17Ah battery pack.
- Geometry: We are planning for a closer "reach" with our geometry - so the rider has a nice upright riding position. In the scenario when a user has dual battery, there is less clearance to actually remove the downtube battery (Note that the downtube battery is removed from the top in the case of step through frame).
- Frames capable of doing up to 350 lb: With the larger 17Ah battery, the frame stress and flex tests are not up to spec due to the larger downtube.
- Yes, there will be braze-ons for the rear racks on the production run.
- Here is a link to the diamond (regular) frame.
Last edited: