Which brake first?

[Chargeride]

Whichever one is working that day

 

[GMA52]

Whichever one is working that day

Wait till they both fail then you won’t have to worry about hitting the brakes

 

[Gionnirocket]

Wait till they both fail then you won’t have to worry about hitting the brakes

But when they both fail.... which one should you use first?

 

[GMA52]

But when they both fail.... which one should you use first?

I am sure I would have a heart attack and not have to worry about it

 

[PedalUma]

The worst are MacFox. Most cannot stop and parents do not know how to adjust them, so the kids use their shoes.

 

[edobici_forza]

It depends.

Steep downhill:
Yesterday, riding my Creo down a short, but steep, gravel road (range of 6% - 23%) with ruts...first time riding that trail, I had my dropper down, gripping the drops, and standing on pedals... Initially I slow with light rear braking, to see the looseness of the Category 3 gravel/dirt. then lighten up the rear a bit and add front brake to control my speed (max 12mph) to navigate the ruts crossing the trail. some of the loosest steep stuff I've ridden on the Creo so far. Then I modulated front and rear, as needed.

Mild downhill: Usually I tap the rear brake first, then add the front, modulating it as needed.

Flat: First light rear braking, then finish with the the front brake.


Here is that steep loose section (thanks to Garmin + Strava):

- - - -

I was paying extra attention on the loose gravel, since I slid out on loose dirt, over hardpack dirt on a downhill off-camber turn, riding my MTB, two days prior.

 

[JL0256]

On dry pavement the front brake does most of the stopping, because weight transfers forward under braking. So for a quick stop you generally want both brakes, with a smooth squeeze on the front and the rear used to stabilize.

I don’t really think in terms of “which first” — I feather the rear, then progressively load the front. In low traction (wet/gravel) you use less front and keep everything smooth to avoid lockups. Rear-first as a habit can mean longer stopping distances, but grabbing front too hard is what sends people over the bars.

Rule of thumb: both brakes, smooth + progressive, adjust front/rear bias to conditions.

 

[stompandgo]

Whichever one is working at the time.

 

[Gionnirocket]

On dry pavement the front brake does most of the stopping, because weight transfers forward under braking. So for a quick stop you generally want both brakes, with a smooth squeeze on the front and the rear used to stabilize.

I don’t really think in terms of “which first” — I feather the rear, then progressively load the front. In low traction (wet/gravel) you use less front and keep everything smooth to avoid lockups. Rear-first as a habit can mean longer stopping distances, but grabbing front too hard is what sends people over the bars.

Rule of thumb: both brakes, smooth + progressive, adjust front/rear bias to conditions.

Exactly... anything else is just plain stupid

 

[BEC111]

Brakes, who needs them; they only slow you down.

You must be a NYC bike messenger

 

[JGcycle]

 

[TR.Brummer]

Mash both to handlebars at same time. 20 to zero in 15 feet. Low seat/CG.

 

[Cedotze2002]

How about learning YOUR vehicle start with practicing emergency braking so will learn your capabilities and your bike's capability. Everyone is different my reaction timing maybe different from yours. We all know practice makes perfect and muscle memory is the hardest to unlearn.

 

[gromike]

...and practice sober, and then after a few drinks. The computer doesn't react the same and it's good to know, if you're not wanting to kiss the pavement.