pyorahullu
New Member
- Region
- Europe
Heye
You maybe have noticed that the bearing on rear wheel on disc brake side is por protected from dirt going into it. I have a solution to grease the bearing and prevent dirt going into bearing.
1. Remove rear wheel and ewerything from disc brake side ( including plastic cable protector, no disc)
2 buy a seal 16x30x4,5 mm
3. Put grease into the bearing ( there is a small hole)
4. Put grease to the seal and axel.
5. Insert seal in place
Notice. 5 mm thickness is too much
Here example of the seal
You maybe have noticed that the bearing on rear wheel on disc brake side is por protected from dirt going into it. I have a solution to grease the bearing and prevent dirt going into bearing.
1. Remove rear wheel and ewerything from disc brake side ( including plastic cable protector, no disc)
2 buy a seal 16x30x4,5 mm
3. Put grease into the bearing ( there is a small hole)
4. Put grease to the seal and axel.
5. Insert seal in place
Notice. 5 mm thickness is too much
Here example of the seal