, phone holder , suspension seat post , put 22 psi of air in tires and charged the battery. I also set pas sensitivity to 1 and pas strength to 5 (P11 and P12) 
Great post!Order #4008 arrived yesterday.
Controller locked.
Paint chipping off next to folding latch with ugly bend like someone hit it with hammer. Rest of the bike looks good except the screen which I think is ugly.
Break pads were touching the rotors so I had to make little adjustment and they are perfect now. Cleaned them too and they are as quite as they can be.
Rear derailleur didn't shift to 1st and 2nd gear. Removed the guard and it still didn't shift so I had to adjust it. 30 min and it shifts perfect but there was another problem. Chain was rubbing against derailleur rail , I think that's how you call it , so I had to bend it a little to make clearance for chain . Worked great and everything is working as it should now.
After that I installed new handlebar grips , left mirror , switch for car horn
By then it was after 10pm so no fun ride but I did little testing today.
10 miles on odometer with mix of every pas level and throttle took 1 battery bar (not bad).
Seat got to go. Even with suspension post it is bad on bumpy road.
Tires are very noisy and I be changing them to Kenda road tires.
Screen is ugly , I would like it if it was in horizontal position.
Now little on technical side.
Speed won't increase even if you disconnect speed sensor wire (tried throttle only) , it also disconnects speedometer.
Controller is 6 FET only , with no brand name on it , just printed sticker with basic info.
It limits power at 18A so normal current around 11A. ( I think this limits the speed but don't take my word for it ) .
It is around 100mm long and you can fit bigger in frame no problem.
Someone asked if I ordered color screen and the answer is yes. I ordered KT LCD8H screen but if you want this screen you will need new controller too. Original controller won't pair with this screen.
That's it for now , will try uploading some pics tomorrow.
Order #4008 arrived yesterday.
Controller locked.
Paint chipping off next to folding latch with ugly bend like someone hit it with hammer. Rest of the bike looks good except the screen which I think is ugly.
Break pads were touching the rotors so I had to make little adjustment and they are perfect now. Cleaned them too and they are as quite as they can be.
Rear derailleur didn't shift to 1st and 2nd gear. Removed the guard and it still didn't shift so I had to adjust it. 30 min and it shifts perfect but there was another problem. Chain was rubbing against derailleur rail , I think that's how you call it , so I had to bend it a little to make clearance for chain . Worked great and everything is working as it should now.
After that I installed new handlebar grips , left mirror , switch for car horn
By then it was after 10pm so no fun ride but I did little testing today.
10 miles on odometer with mix of every pas level and throttle took 1 battery bar (not bad).
Seat got to go. Even with suspension post it is bad on bumpy road.
Tires are very noisy and I be changing them to Kenda road tires.
Screen is ugly , I would like it if it was in horizontal position.
Now little on technical side.
Speed won't increase even if you disconnect speed sensor wire (tried throttle only) , it also disconnects speedometer.
Controller is 6 FET only , with no brand name on it , just printed sticker with basic info.
It limits power at 18A so normal current around 11A. ( I think this limits the speed but don't take my word for it ) .
It is around 100mm long and you can fit bigger in frame no problem.
Someone asked if I ordered color screen and the answer is yes. I ordered KT LCD8H screen but if you want this screen you will need new controller too. Original controller won't pair with this screen.
That's it for now , will try uploading some pics tomorrow.
Would be in wrong category.
Saw this in Vancouver yesterday while riding are e-Bikes. Proof the locks do work.
Yep. As I said, Its EXTREMELY easy to change a setting and you do not realize you did it. All of that though, could have been avoided by either A) put in a sheet of paper in the box that has the settings defaults or B) email everyone the digital copy of that paper when they ship out the bike. But locking out the settings to avoid getting those calls, well, that's probably why we are here having this discussion today.
Interesting
The packing material has improved since the Aug deliveries. They now have a shield over the derailleur guard. The bent derailleur guard phone calls judging by the number of posts had to have driven them nuts. The seats are now wrapped, where they were not before and and a little more anti scratching foam material.
Mine had it as well. 26 September delivery
Agree on the seat, just got my Cloud 9 seat that people were suggesting and it made a huge difference.Order #4008 arrived yesterday.
Controller locked.
Paint chipping off next to folding latch with ugly bend like someone hit it with hammer. Rest of the bike looks good except the screen which I think is ugly.
Break pads were touching the rotors so I had to make little adjustment and they are perfect now. Cleaned them too and they are as quite as they can be.
Rear derailleur didn't shift to 1st and 2nd gear. Removed the guard and it still didn't shift so I had to adjust it. 30 min and it shifts perfect but there was another problem. Chain was rubbing against derailleur rail , I think that's how you call it , so I had to bend it a little to make clearance for chain . Worked great and everything is working as it should now.
After that I installed new handlebar grips , left mirror , switch for car horn
By then it was after 10pm so no fun ride but I did little testing today.
10 miles on odometer with mix of every pas level and throttle took 1 battery bar (not bad).
Seat got to go. Even with suspension post it is bad on bumpy road.
Tires are very noisy and I be changing them to Kenda road tires.
Screen is ugly , I would like it if it was in horizontal position.
Now little on technical side.
Speed won't increase even if you disconnect speed sensor wire (tried throttle only) , it also disconnects speedometer.
Controller is 6 FET only , with no brand name on it , just printed sticker with basic info.
It limits power at 18A so normal current around 11A. ( I think this limits the speed but don't take my word for it ) .
It is around 100mm long and you can fit bigger in frame no problem.
Someone asked if I ordered color screen and the answer is yes. I ordered KT LCD8H screen but if you want this screen you will need new controller too. Original controller won't pair with this screen.
That's it for now , will try uploading some pics tomorrow.
May I make a suggestion, when we post about settings, could we make reference whether the XP bike is "Pre-Locked Settings" or "Locked Settings"? This will help avoid confusion, especially for new members. This is just my suggestion. Thanks to all for the valuable posts and info you all have posted and continue to post.
Good deal and great report on your bike!My XP arrived earlier this morning and when I made it back home I immediately took it out of the box and began charging the battery outside of the bike. It did not have any damage anywhere that I could find. The derailure was not bent, I was able to shift from 1-7. It might need a tune up though as shifting isn't as smooth as I want it.
I then checked bolts and nuts, pedals and other such things to make sure they're all tight and secure. I aired up the tires to 30 PSI and adjusted the handlebar stem and seatpost to my liking. I also installed the panniers just to see what they looked like. They're good enough for me, only thing is the back of my shoe hits it when pedaling.
I wanted to know what the bike would ride like without the battery inside and under my human power alone. I can say that as-is it rides more comfortable than my old folder. It's a lot heavier but it's still feasible especially in 3rd gear which to me is comfortable effort. I immediately felt the difference when rolling over bumps, cracks, sidewalks and small potholes. A lot of XP owners have complained about the rough ride, lack of suspension, lack of suspension handlebars, lack of suspension seatpost, deflating your tires, etc. in pursuit of comfort. You guys are spoiled babies! That means you guys wouldn't survive the 15 (one way) miles I put on my folder when I go for rides.It's Rock solid so the XP feels like a Cadillac to me.
(FYI, I'm just kidding I realize we're not all the same age and in the same health conditions.)
The battery is still charging and I'm dying to feel DA POWER!!!
I'm #5093 and ordered the last day of August with an expected delivery date of October?, nothing yet. I'm a 4 hour drive from Phoenix and wonder if they have "customer pick-up" in lieu of delivery?
Probably not,I believe they have moved their operations to California.
Same, I ordered on August 31st at about 10pm and I haven't heard anything yet other than when I emailed Lectric last week and Brent said they suspected that mine would go out this week. I suspect you and I will probably receive shipping notifications around the same time.
The bikes arrive in the Port of Los Angles. Processed at a shipping center in Montclair CA and Shipped from FedEx in Arcadia CA. The only time the bikes see AZ is for a delivery.
