With all my non-e-bikes I would just turn it over onto the handlebars and seat and go to town. now I have a computer display box protruding in such a way that I can't use that method. What is the best way to deal with this?
If you have a bar end plug that you can remove it should work.Good solution! How would this work with a throttle grip though?
Good solution! How would this work with a throttle grip though?
I bought mine for the Juiced HF1100 for that exact reason. You don’t have 2x4s out on the road.If you have a bar end plug that you can remove it should work.
If you have a bar end plug that you can remove it should work.
You should really go tubeless. You will almost never have flats.I'm going to look at this one. Thanks so much for your help.
I cut some donuts from foam packing material. About 3" thick and 10" diameter. Slip those on to the hand grips before flipping the bike over and you should be good to go.
You should really go tubeless. You will almost never have flats.
Mine tighten just fine. My bike weighs 70lbs. They won’t turn once tightened.Something like this could be the solution:
https://www.amazon.com/Kbrotech-Han...&qid=1553200126&s=sporting-goods&sr=1-1-fkmr2
The only problem is that they don't tighten enough, they rotate. Seems that all of them have that problem. I'm certain it would rotate with my bikes weight on it.
Ergon GP5 large.May I ask, what brand and model do you use?
Ergon GP5 large.
now I have a computer display box protruding in such a way that I can't use that method.