Hi
Does anyone know, have experience in reprogramming M410 motor.
To give power at low speed 10km ph, and low gears?
I have a trike, with M410 and Nexus inter 5e hub.
It has plenty of power, to pull 100 kg in the front, basket and 60kg in a small trailer.
Up a 15% gradient.
So power is not the issue.
But on a slight gradient, probably 1 or 2 %.
The assistance is either not coming on at all OR at a very low level.
To the point that after travelling 1.5km / 1 mile, with the trailer, larger trailer, total around 100 kg,
I am exhausted.
I live off a dual carriageway so have to take this road everyday. When I turn round at the round a,bout so am now on the same road, on the opposite carriageway, which has a steeper gradient, the assistance works fine.
Does anyone know, have experience in reprogramming M410 motor.
To give power at low speed 10km ph, and low gears?
I have a trike, with M410 and Nexus inter 5e hub.
It has plenty of power, to pull 100 kg in the front, basket and 60kg in a small trailer.
Up a 15% gradient.
So power is not the issue.
But on a slight gradient, probably 1 or 2 %.
The assistance is either not coming on at all OR at a very low level.
To the point that after travelling 1.5km / 1 mile, with the trailer, larger trailer, total around 100 kg,
I am exhausted.
I live off a dual carriageway so have to take this road everyday. When I turn round at the round a,bout so am now on the same road, on the opposite carriageway, which has a steeper gradient, the assistance works fine.
