Bobafett
New Member
- Region
- USA
Hey folks. I’m about at my wits end. I installed a new bbshd on my mountain bike. It worked great for 3 mins. Then the throttle and PAS stopped working. Everything else, like the display, speed sensor and work great. The mph is displayed on the 860c as well as the correct battery voltage. I’m using a 52v 20ah battery, lg cells. The motor just won’t turn on.
I have tried the following:
-opened up controller and inspected phase wires and visually inspected and smelled controller. Smells and looks brand new.
-adjusted speed sensor multiple times. The first pass of the magnet turns the LED on, and it stays that way except it blinks off quickly then back on with each subsequent magnet pass. I think that’s how it’s supposed to work.
-I took off brake and gear sensors.
-triple checked connections and battery terminals.
Is there anything I could be missing?
Thanks in advance.
-
I have tried the following:
-opened up controller and inspected phase wires and visually inspected and smelled controller. Smells and looks brand new.
-adjusted speed sensor multiple times. The first pass of the magnet turns the LED on, and it stays that way except it blinks off quickly then back on with each subsequent magnet pass. I think that’s how it’s supposed to work.
-I took off brake and gear sensors.
-triple checked connections and battery terminals.
Is there anything I could be missing?
Thanks in advance.
-