Latest activity
-
sandyman44 replied to the thread Vado SL 4.0 with a suspension fork?.ebay. £1k, which is about right. My understanding to-date is that its will take a 1-1/8" straight tube fork. hoping that one of whats... -
Rás Cnoic replied to the thread Vado SL 4.0 with a suspension fork?.Good stuff! Was it via ebay or a local shop? Good deal?! -
sandyman44 replied to the thread Vado SL 4.0 with a suspension fork?.collecting a 2nd hand vado 4.0 Sl this weekend. I'll frankenbike it with a suspension fork from an old hardtail mtb just to prove the...
-
This rum has a flavor I can't describe. -
Rás Cnoic replied to the thread Watching the peloton - Professional Road Racing thread 2026.Hmmmm... might need the range extender for these.
-
Stefan Mikes replied to the thread Vado SL 4.0 with a suspension fork?.Yes I meant the steerer tube. Vado SL 4 and 5 have different forks.
-
Stefan Mikes reacted to Allan47.7339's post in the thread Vado SL 4.0 with a suspension fork? with
Like.
OK. I thought you were referring to the steerer tube which is part of the fork assembly not the handlebar stem. -
CChargeride replied to the thread Just for fun....Yes and the way they do it is they munch, get sprayed and run off, then you are left with a fine mist that slowly soaks everything...
-
CRodents already eat PEX. That's one of the reasons we went with copper.
-
Jeremy McCreary replied to the thread Watching the peloton - Professional Road Racing thread 2026.Fun fact Together, Stages 6-8 involve about 35,000 ft of climbing over a total distance of 271 mi. That's 139 ft/mi on average, or 24.3... -
Allan47.7339 replied to the thread Vado SL 4.0 with a suspension fork?.OK. I thought you were referring to the steerer tube which is part of the fork assembly not the handlebar stem. -
-
That's entirely possible,.. A cadence sensor measures speed just like a pitot tube. I blame those damn wasps !!!
-
spokewrench replied to the thread Failed cadence sensor.If the controller worked directly from the transistor pulse, you would often see PAS faults on startup. The KT controller used to work...
-
spokewrench replied to the thread Failed cadence sensor.My tube had been punctured by a hair-thin wire. The hole was so tiny that it wouldn't leak when I inflated the tube and held it under...
