Search results

  1. riverracer

    GIANT RideControl App 2.0

    phone app update worked, bike now connects and can be controlled by phone.
  2. riverracer

    GIANT RideControl App 2.0

    tried 5 times on my android S21+, failed each time. app says it's upgraded successfully each time, says turn off/restart to finish upgrading. each time there's a new update process to go thru. tried wifi n mobile data, nothing worked.
  3. riverracer

    Explore E+1 front fork pressure

    the Australian Explore E+1 comes with a RST Vivair E front suspension fork with 60mm travel. on the last couple of rides it has been bottoming out and staying in the down position even with the lockout off. think i might have a leak... on a 3 1/2mth old bike..... there's nothing in the owners...
  4. riverracer

    VoLspeed 3 + Explore E+1 question

    I have recently installed a VoLspeed 3 into my 2020 Explore E+1 and it is almost perfect. I say almost because there's a small niggling problem, well i think it's a problem... the Ridecontrol app and my phones GPS both report different distances traveled. The VoLspeed 3 has a setting in the...
  5. riverracer

    Found a way to work around the Speed limiter . Anyone know if this can damage my motor or battery?

    I tried it on my 2020 Explore E+1 couple of weeks ago, loved the extra power, But because it obvious the sensor has been shifted/modified, I decided to buy a Volspeed 3 and fit that. Can turn it on/off with the key press sequence at will, 'off' is the 25km limit and 'on' I leave it at 32km...
  6. riverracer

    Giant EXPLORE E+ 1 2020

    not up the tube, but pushed up a little higher under the covers than your photo. my bike is a small frame, so probably less room to start, but managed to get the plugs up the tube. as for the puller, i'm a toolmaker that uses lathes/mills etc to make plastic injection moulds, so it was a quick...
  7. riverracer

    Giant EXPLORE E+ 1 2020

    made a crank puller at work, disassembly was easy, pluged in and all tested ok. re routing the wires is certainly a task that needs a lot of meditation (or medication.....🍻) i turned the bike upside down and used a small wooden icecream stick to help push/massage the wires back up in the tube...
  8. riverracer

    Giant EXPLORE E+ 1 2020

    All mine has is a Lock Screw with plastic dust shield and a Threaded crank with square hole. I'm a Toolmaker (machinist), so I'll just machine up a crank puller at work, not paying nearly 30$ for a once off use.
  9. riverracer

    Giant EXPLORE E+ 1 2020

    just went and had a look, just a std socket for the Sport motor on the 2020 Explore E+1 over here. square shaft in crank, not self extracting.
  10. riverracer

    Giant EXPLORE E+ 1 2020

    36mm socket is easy, might have to make a crank puller at work !
  11. riverracer

    Giant EXPLORE E+ 1 2020

    Hopefully soon :D The above picture is a great start, it don't look too bad in there...... was it? I just ordered mine, should be here later in the week from Cairns.
  12. riverracer

    Giant EXPLORE E+ 1 2020

    I'll be watching this as i'm wanting to go thru the de restricting process as well on the same model bike. where did you buy your module from? price?
  13. riverracer

    Giant SyncDrive Pro 2020 "tuning"

    I have had my 2020 Explore E+1 (syncdrive sport) here in Australia for just over 2mths now and love it, almost...... the 25km/h limit is a killer. So i tried the "move the sensor, add magnet to the crank" trick... I love the POWER it gives, so, i want to do it correctly now. Have read thru this...
  14. riverracer

    Our Rides in Words, Photos & Videos

    what andriod app/software do people use to track their rides? something that maps where "i go" as i ride, not where a pre-planned route wants to take me... Giant Explore E+1
  15. riverracer

    Tannus Armour Liner Noise

    I have just installed a pair of Tannus Armour 700x42-47C [(42-47)-622] liners with 700x28C-32C tubes, as per the website "https://tannusamerica.com/pages/tannus-faq", into my Giant 700x45C CrossCut Gravel 2 tires.. Now the front wheel went without a hitch. But the back wheel makes a "sqelching"...
  16. riverracer

    RideControl EVO GoPro Mount

    As it's only a working draft, it's made from PLA, as it's a cheap material, but not UV stabilized. Still have a bit of refining to do around the click fit to make the original GoPro mount fit better. I have access to better printers at work that can print in ABS and other exotic materials. As...
  17. riverracer

    Handlebar mount for Go Pro

    GoPro do sell a handle bar mount. I 3D printed a mount to suit my Giant Explore E+1 as i could not find a straight ahead position on my handle bars.
  18. riverracer

    Ride Control Firmware

    Glad i'm not the only one who's lights now come on by default, only had the bike just over a week and it did an update on Saturday, thought i was going mad with the lights, maybe they were, maybe they weren't always like that..... What's wrong with the auto assist? I leave mine in the auto...
  19. riverracer

    Ride Control has been Updated to App version : v1.2.1

    My bikes software updated last night, now the inbuilt lights come on automatically, never noticed them do that before. Gotta remember to turn them off now. Bike SW 20201203000 App 1.2.2
  20. riverracer

    RideControl EVO GoPro Mount

    Got my new Small framed Explore E+ 1 last weekend, after driving from Adelaide to Melbourne, 1550km round trip. Had plenty of time to think of upgrades to do, extra lights/strobes, x-bar phone bag, lock mounts etc. on the way home. Came up with an idea to mount my GoPro on the Evo mount. Got...
Back