Search results

These in small would fit you but its $4500 https://lunacycle.com/z-1-enduro-ebike/ https://lunacycle.com/x2-enduro-rockshox-edition/

I used to use a mirror like the ones posted here but it just didn't give me the coverage that I wanted especially when riding in DC during rush hour traffic. I switched over to an automotive rearview camera that fed off my battery, but it didn't work that well at night. Now I use a radar...

My commute is 18 miles one way and with my dual motor setup (front geared hub and rear direct drive), I average 18-19 mph in eco mode. I carry a lot of gear on my electric cargo so sometimes I'm running it at 210 watts on the flats, other times at 400 watts when I'm climbing steep hills. It...

I would keep looking. Drum brakes don't work that well and require a lot more effort than even V-brakes.

Most kickstand just don't do a good job holding up a bike. I gust of wind and my bike fell on its side bending my disc brakes. Now I use a heavy duty double leg kickstand that is strong enough to hold the bike with all its gear comfortably.

Hope you see you guys tomorrow for Bike to Work Day 2021. I'll be at Gateway Park in Rosslyn VA I'll be on my Radwagon https://www.bikearlington.com/bike-to-work-day/

I also ride with 2 batteries on my Radwagon, one to control each motor. The front geared motor was to give me the climbing ability that my rear direct drive couldn't do. The front motor uses a 17 ah battery (884 watts), and the rear uses a 28 ah battery (1456 watts). I've gone 125 miles with...

I would buy them but I can't find any places that have them.

I use a cargo trailer to carry extra batteries. It prevents my bike from getting too rear heavy and I can carry food and water.

For me, the kit came with 3 different PAS options. One was a small ring that has an inner ring that holds the square axle on the bottom bracket. You push the unit over the axle and the inner ring moves with the square axle. The outer unit stays in place while the inner ring moves with your...

I have a smart trainer that I purchased a little over a months ago and hooked it up to my screen projector. I've been riding on various roads in BigRingVR. I do about a hour each day and have put about 260 miles on the trainer so far. This one is Alpe d'Huez in France...

I picked up the Coho XC just for fun. One thing I noticed is that the way the attachment is made, you can't use it with a bicycle that has a rear rack made for disc brakes. I have an Ibera rack. Maybe a Topeak will work better. The rack protrudes out and blocks the space you need to drop the...

I've had similar crackling noises on my BBSHD when pedaling. I was able to track it down to the motor pressing against the bottom bracket (chain side) causing the noise as the frame flexed. I just sprayed from WD40 between the motor and the bottom bracket and the problem went away.

Most locks can be easily broken especially if bar extends out from the U-lock

So far, I see e-scooters have a 3 wire setup for their brakes but I'm not sure if that will work with bikes.

I purchased a brake light that has 3 wires; red, yellow, black. To test it, I used a 9v battery. When I run current through the red and black, I get the usual light when riding. When using yellow and black, the light is brighter. I'm assuming that's when you applied the brake. The...

None of these kits require any soldering. This bike tool kit has everything you need to put together any kit out there. I have one just like it and, its help me but together hub kits and mid-drive kits.

It sounds like that system was mainly designed for throttle only and the PAS was an after thought. It's probably programmed to run 100% of the power until each level's speed is reached. My experience with RAD is that each level runs at a fixed percentage of the total battery watts. As you get...

I think Grandma Joan rode a Vado when she beat Sagan up that steep hill. All jokes aside, what they claim at 250 watts is probably close to 2-3x that power.

I've notice that I ride much slower in the app than in real life too. I'll have to figure out how to change the resistance. thanks!