Show Us a Tool

[Gionnirocket]

Seems they're missing the tools to fix it. . .

 

[LandoftheGiants]

A customer just gave this to me. Fat bikes are such a pain to hand pump. This thing makes it fast and easy.

View attachment 213379

I haven't used a hand pump in 30 years of cycling, except once when I got a flat and the patch wasn't good. Initially I pumped the tire up with CO2 cylinders but when it started to go back down I had to use the little pump I carried. At home I use a 12V car tire compressor, I run them off old motorcycle starter batteries or little 7A gelcells. Picture an icecream bucket with the two inside.

 

[6zfshdb]

One of the handiest (and cheapest) tools I own. It's just a short piece of silicone tubing:

Very handy for starting small nuts in hard to reach places

If the fit is too loose, use a small zip tie to hold the nut in place:

 

[Base]

I use this gedore clipon for that

 

[Gionnirocket]

I know a lady that used a strap_on... but it was nutless

 

[6zfshdb]

View attachment 213790View attachment 213791

I use this gedore clipon for that

Yes, that works great for larger nuts in places where you can fit a wrench into. The tubing idea is for small nuts in much more confined places, like the bottom of a small can or other similarly confined spaces.

 

[PedalUma]

@Gionnirocket, I made this one for you.

 

[fooferdoggie]

One of the handiest (and cheapest) tools I own. It's just a short piece of silicone tubing:

View attachment 213785

Very handy for starting small nuts in hard to reach places

View attachment 213786 View attachment 213787

If the fit is too loose, use a small zip tie to hold the nut in place:

View attachment 213788

or get a few small magnets and put them in your socket.

 

[PCeBiker]

I made a Cozy Tool out of a plastic Mason style fruit jar,..

It fits Real Snug.
This is a full can of ,..

It's just a dead air space, but it's pretty well sealed, and I put two Styrofoam lid seals on the bottom to insulate and isolate the bottom of the can to keep it from conducting heat (or coldness) into the plastic fruit jar,..

I'm good to go for a long-winded slow that's now cold until the Last drop.

 

[PCeBiker]

or get a few small magnets and put them in your socket.

I just bought 200 magnets

I only need a few.
I'll put the rest in my socks,..

 

[PedalUma]

I got no hits on my StrapOn tools. So, I made this:

 

[kevinmccune]

@Gionnirocket, I made this one for you.
View attachment 213800

that's a lot better then the "pretty "tech reading a OBD screen( spoiler,she ain't fixin nutting!)

 

[kevinmccune]

I got no hits on my StrapOn tools. So, I made this:

View attachment 213820

I got no hits on my StrapOn tools. So, I made this:

View attachment 213820

Mullet girl,is hot!

 

[PedalUma]

Mullet girl,is hot!

Watch out! She will kick your butt. And be your master. She won't take no lip. I incorporated a small touch of Rosie the Riveter.

 

[PedalUma]

For years I have been puzzling on how to best keep a book open while for example, eating. I have tied wrenches with rubber grips on them, bars with rubber bands. Now I found how. It is simple. It is flexible on the contours and yet heavy enough to hold the pages open. Look mom, no hands! You can eat while reading outside with the wind. I will get a grown up book in the morning; I am fresh out tonight and had to read something.

 

[kevinmccune]

Yes, that works great for larger nuts in places where you can fit a wrench into. The tubing idea is for small nuts in much more confined places, like the bottom of a small can or other similarly confined spaces.

For years I have been puzzling on how to best keep a book open while for example, eating. I have tied wrenches with rubber grips on them, bars with rubber bands. Now I found how. It is simple. It is flexible on the contours and yet heavy enough to hold the pages open. Look mom, no hands! You can eat while reading outside with the wind. I will get a grown up book in the morning; I am fresh out tonight and had to read something.

View attachment 213838

"Lemony" in your tea?,just an afterthought,ever hear of "Ring Lauder"? think I spelled that right.

 

[LandoftheGiants]

View attachment 213790View attachment 213791

I use this gedore clipon for that

I use a big magnet, and rub it along my tools.