Turbo Creo with SRAM etap

[kattanm]

I would like to drop the cassette from 10-50 to 10-36, say a Rival XG-1250.
I'm being told this would trigger the need for a new rear derailleur as well (Eagle derailleur only works with Eagle cassettes).
And I'd need a new freehub body. Would this also mean a wheel rebuild?

Yikes. True?

 

[Gear]

I would like to drop the cassette from 10-50 to 10-36, say a Rival XG-1250.
I'm being told this would trigger the need for a new rear derailleur as well (Eagle derailleur only works with Eagle cassettes).
And I'd need a new freehub body. Would this also mean a wheel rebuild?

Yikes. True?

I’m not sure about the freehub body. the cassette might work on the one on the bike. But at any rate you wouldn’t need a wheel rebuild Even if you need a freehub body. Yes, the eagle cassette needs the eagle derailleur and I believe eagle chain. Make sure you have a chainring that matches the 12 speed SRAM parts, you’ll need to go to Praxis for that.
I began by getting the chainring, since the eagle parts are readily available, I am waiting for Rival shifters next.

 

[Mike Miranda]

Praxis or Wolftooth will work

 

[kattanm]

If it still works I’m ok with leaving the 46 chainring. Just want the other cassette.
Must I for sure change the rear derailleur? Eagle derailleur requires Eagle cassette?

 

[Mike Miranda]

If it still works I’m ok with leaving the 46 chainring. Just want the other cassette.
Must I for sure change the rear derailleur? Eagle derailleur requires Eagle cassette?

if you are using the 1250 XG then yes

 

[kattanm]

if you are using the 1250 XG then yes

Ok great! I'll get:
1. SRAM Rival AXS 12-Speed Rear Derailleur
2. SRAM Rival XG-1250 12-Speed Cassette 10-36

Now, which freehub body hub do I need?

 

[Mike Miranda]

FInally got everything I will get everything dialed in on the 8th

 

[kattanm]

My shop is converting tomorrow. I got them this just in case it was needed:

DT Swiss SRAM XDR Freehub Body for Ratchet Drive Hubs | Jenson USA

www.jensonusa.com

 

[Mike Miranda]

Ok great! I'll get:
1. SRAM Rival AXS 12-Speed Rear Derailleur
2. SRAM Rival XG-1250 12-Speed Cassette 10-36

Now, which freehub body hub do I need?

that depends the hubs you are using

 

[kattanm]

that depends the hubs you are using

the stock one, Roval AFD hub.

 

[mschwett]

My shop is converting tomorrow. I got them this just in case it was needed:

DT Swiss SRAM XDR Freehub Body for Ratchet Drive Hubs | Jenson USA

www.jensonusa.com

awesome. let us know how it goes.

 

[Mike Miranda]

My Creo should be ready for pick up 2morrow sooo Excited

 

[kattanm]

My conversion went great. Now 10-36. Didn’t need that extra part either.

 

[Mike Miranda]

I used a 10-50 on my rear

 

[mschwett]

I used a 10-50 on my rear

which cassette?

 

[Mike Miranda]

which cassette?

SRAM XX1 EAGLE XG-1299​

 

[Mike Miranda]

 

[ichavis]

View attachment 93307View attachment 93308View attachment 93309View attachment 93310

I just finished the wireless 12 speed upgrade on my Creo Comp Carbon Sl Evo. Went with eagle gt and an eagle xo 10-50 rear cassette , sram 44t front ring , rival etap shifters and sram red brakes. Works great !

 

[kahn]

I just finished the wireless 12 speed upgrade on my Creo Comp Carbon Sl Evo. Went with eagle gt and an eagle xo 10-50 rear cassette , sram 44t front ring , rival etap shifters and sram red brakes. Works great !

Oh, I really am out of it. I never knew such a thing existed? No wires or cables to the rear?

 

[ichavis]

Oh, I really am out of it. I never knew such a thing existed? No wires or cables to the rear?

No cables for shifting .. of course braking is hydraulic