Turbo Creo with SRAM etap

[kattanm]

I would like to drop the cassette from 10-50 to 10-36, say a Rival XG-1250.
I'm being told this would trigger the need for a new rear derailleur as well (Eagle derailleur only works with Eagle cassettes).
And I'd need a new freehub body. Would this also mean a wheel rebuild?

Yikes. True?

 

[Gear]

I would like to drop the cassette from 10-50 to 10-36, say a Rival XG-1250.
I'm being told this would trigger the need for a new rear derailleur as well (Eagle derailleur only works with Eagle cassettes).
And I'd need a new freehub body. Would this also mean a wheel rebuild?

Yikes. True?

I’m not sure about the freehub body. the cassette might work on the one on the bike. But at any rate you wouldn’t need a wheel rebuild Even if you need a freehub body. Yes, the eagle cassette needs the eagle derailleur and I believe eagle chain. Make sure you have a chainring that matches the 12 speed SRAM parts, you’ll need to go to Praxis for that.
I began by getting the chainring, since the eagle parts are readily available, I am waiting for Rival shifters next.

 

[Mike Miranda]

Praxis or Wolftooth will work

 

[kattanm]

If it still works I’m ok with leaving the 46 chainring. Just want the other cassette.
Must I for sure change the rear derailleur? Eagle derailleur requires Eagle cassette?

 

[Mike Miranda]

If it still works I’m ok with leaving the 46 chainring. Just want the other cassette.
Must I for sure change the rear derailleur? Eagle derailleur requires Eagle cassette?

if you are using the 1250 XG then yes

 

[kattanm]

if you are using the 1250 XG then yes

Ok great! I'll get:
1. SRAM Rival AXS 12-Speed Rear Derailleur
2. SRAM Rival XG-1250 12-Speed Cassette 10-36

Now, which freehub body hub do I need?

 

[Mike Miranda]

FInally got everything I will get everything dialed in on the 8th

 

[kattanm]

My shop is converting tomorrow. I got them this just in case it was needed:

DT Swiss SRAM XDR Freehub Body for Ratchet Drive Hubs | Jenson USA

DT SWISS XDR FREEHUB BODY FOR RATCHET DRIVE HUBS GETTING RATCHET If youre looking to replace your freehub body or upgrade it so you can use SRAM XD cassette then youll want to pick up the DT Swiss XDR Freehub Body For Ratchet Drive Hubs. It is compatible with DT Swiss 180 240 350 and 440 hubs...

www.jensonusa.com

 

[Mike Miranda]

Ok great! I'll get:
1. SRAM Rival AXS 12-Speed Rear Derailleur
2. SRAM Rival XG-1250 12-Speed Cassette 10-36

Now, which freehub body hub do I need?

that depends the hubs you are using

 

[kattanm]

that depends the hubs you are using

the stock one, Roval AFD hub.

 

[mschwett]

My shop is converting tomorrow. I got them this just in case it was needed:

DT Swiss SRAM XDR Freehub Body for Ratchet Drive Hubs | Jenson USA

DT SWISS XDR FREEHUB BODY FOR RATCHET DRIVE HUBS GETTING RATCHET If youre looking to replace your freehub body or upgrade it so you can use SRAM XD cassette then youll want to pick up the DT Swiss XDR Freehub Body For Ratchet Drive Hubs. It is compatible with DT Swiss 180 240 350 and 440 hubs...

www.jensonusa.com

awesome. let us know how it goes.

 

[Mike Miranda]

My Creo should be ready for pick up 2morrow sooo Excited

 

[kattanm]

My conversion went great. Now 10-36. Didn’t need that extra part either.

 

[Mike Miranda]

I used a 10-50 on my rear

 

[mschwett]

I used a 10-50 on my rear

which cassette?

 

[Mike Miranda]

which cassette?

SRAM XX1 EAGLE XG-1299​

 

[Mike Miranda]

 

[ichavis]

View attachment 93307View attachment 93308View attachment 93309View attachment 93310

I just finished the wireless 12 speed upgrade on my Creo Comp Carbon Sl Evo. Went with eagle gt and an eagle xo 10-50 rear cassette , sram 44t front ring , rival etap shifters and sram red brakes. Works great !

 

[kahn]

I just finished the wireless 12 speed upgrade on my Creo Comp Carbon Sl Evo. Went with eagle gt and an eagle xo 10-50 rear cassette , sram 44t front ring , rival etap shifters and sram red brakes. Works great !

Oh, I really am out of it. I never knew such a thing existed? No wires or cables to the rear?

 

[ichavis]

Oh, I really am out of it. I never knew such a thing existed? No wires or cables to the rear?

No cables for shifting .. of course braking is hydraulic