I just purchased a 2022 Specialized Turbo Vado 4.0 to replace my 2019 Turbo Vado 3.0. The 19 Vado has the Racktime rack and have a Racktime bag that mounted to that rack. I just purchased The Basil adapter plate and it replaced the Racktime mounting plate and now works perfectly. I had to just barely enlarge the holes in my Racktime bag by simply sliding a #2 screwdriver shaft through the holes and then the holes lined up fine. A lot cheaper than having to buy another bag. Just thought you might be interested. Thanks. Joedog.
Racktime bag works on MIK HD rack
- Thread starter Joeycdog
- Start date
JustRiding
Member
- Region
- Europe
- City
- Copenhagen
so you put the basil adapter on the rack or changed the adapter on the bag itself?
I am considering upgrading from my SL 4.0 EQ (Racktime) to the SL2 6.0 EQ (MIK HD) but would hate to have to buy new bags because of the different rack system
6zfshdb
Well-Known Member
- Region
- USA
- City
- Northeast Pennsylvania
You can make a Racktime to MIK adapter using these MIK and Racktime adapter plates:
velomine.com
I did it with my Bontrager bags. Check out post #7 in this thread:
forums.electricbikereview.com
Bike Rack Rr Racktime Snapit 2.0 Connect Bk F/Non-Snapit Rack
Converts standard rear racks to be SnapIt 2.0 compatible for use with SnapIt 2.0 accessories Suitable for platform widths from 60-150mm Compatible with tubes from 8 to 18mm Specifications: Type:SnapIt 2.0 Adapter Mount:Bolt On Color:Black Compatibility: Length: Note: : : : : : : : : Wheel...
velomine.com
I did it with my Bontrager bags. Check out post #7 in this thread:
Two MIKs...sort of
I've been transporting an R&M Nevo 3 between Upstate NY and Florida twice a year. With two overnight stops, I was always nervous even with multiple locks. So I just bought a Trek Allant 7s gen 2 and am leaving it in Florid. A plus for the new bike was its MIK compatible rack. So I tried to...
forums.electricbikereview.com
Last edited:
JustRiding
Member
- Region
- Europe
- City
- Copenhagen
I guess the easiest is to buy a MIK adapter plate and fit in under the old Racktime bag. This post claims that the hole pattern is the same, which is of course the prerequisite. Would not like to have to drill extra holes for it in these bagsYou can make a Racktime to MIK adapter using these MIK and Racktime adapter plates:
View attachment 190164View attachment 190165 View attachment 190169
Bike Rack Rr Racktime Snapit 2.0 Connect Bk F/Non-Snapit Rack
Converts standard rear racks to be SnapIt 2.0 compatible for use with SnapIt 2.0 accessories Suitable for platform widths from 60-150mm Compatible with tubes from 8 to 18mm Specifications: Type:SnapIt 2.0 Adapter Mount:Bolt On Color:Black Compatibility: Length: Note: : : : : : : : : Wheel...
I did it with my Bontrager bags. Check out post #7 in this thread:
Two MIKs...sort of
I've been transporting an R&M Nevo 3 between Upstate NY and Florida twice a year. With two overnight stops, I was always nervous even with multiple locks. So I just bought a Trek Allant 7s gen 2 and am leaving it in Florid. A plus for the new bike was its MIK compatible rack. So I tried to...
Similar threads
