Install dedicated headlight with Das-kit C7?

[Phat_E-Bastard]

I don't see an available cable port, but there appears to be a function to turn on a light (when the screen is back-lit it also indicates light is on). Has anyone figured out if and how to install a dedicated headlight? I'm not particularly hopeful, but if it's possible, all the better. Thanks!

 

[FullyCharged]

Where to buy:

Spanninga Kendo Universal Headlight | Leon Cycle

Spanninga Kendo Universal Headlight Powered by Leon Cycle. Shop now and get free shipping on all orders.

www.leoncycle.com

Front Bike Light SPANNINGA KENDO+ 48V XE Version

Front Bike Light SPANNINGA KENDO+ 48V XE Version

www.leoncycle.com.au

Amazon.com

Install instructions

https://www.leoncycle.com.au/assets/brochures/1430000003.pdf

I just removed my battery lock and confirmed the plug location.

​

 

[Phat_E-Bastard]

That's great. Thanks!

 

[FullyCharged]

That's great. Thanks!

No problem, welcome to the forums.

 

[Milbs]

No problem, welcome to the forums.

I just ordered one - is it controlled from the display? Does it flash?

 

[FloridaBiker]

I just ordered one - is it controlled from the display? Does it flash?

It has a button on top the light. I don't think you can control it from the display and it does not have a flash mode.

 

[Milbs]

It has a button on top the light. I don't think you can control it from the display and it does not have a flash mode.

Where does it attach to bike? It says front fork but there’s no mounting point. Pics would be much appreciated!

 

[FloridaBiker]

Here you go

 

[Milbs]

Thanks - so it looks like you had to drill your fork?

 

[FloridaBiker]

No I had a hole already there.

 

[Milbs]

No I had a hole already there.

Just double checked and mine has a threaded hole on the back of the fork! Very odd!
Thanks for the reply.

 

[Papparay]

That's great. Thanks!

Hi buddy, did you remove the full lock or just the cover. I've just removed the lock cover and there's nothing there?

 

[FloridaBiker]

Hi buddy, did you remove the full lock or just the cover. I've just removed the lock cover and there's nothing there?

The full lock, I think it was two screws and the wire should be underneath.

 

[Papparay]

The full lock, I think it was two screws and the wire should be underneath.

Thanks, just need a set of lights now, carrier and a throttle control. Lol

 

[Milbs]

It arrived the other day - VERY easy install.
Sadly it’s not very bright - probably ok for riding on lit roads and paths but my night time route has lots of unlit stretches and I will still need my 1000 lumens on the bar!!

 

[Papparay]

Thank

It arrived the other day - VERY easy install.
Sadly it’s not very bright - probably ok for riding on lit roads and paths but my night time route has lots of unlit stretches and I will still need my 1000 lumens on the bar!!

Thanks for the information, I don't think I'll rush out and buy one unless I get a carrier.

 

[KuRi]

Very useful information, thanks!

Is the AXENDO also compatible?

AXENDO 80 - Spanninga Bicycle Lights

The AXENDO 80 headlamp for e-bikes has 2 high-power REBEL© LEDs, which give an impressive 80 Lux light output in a bright, but non-blinding, light beam.

spanninga.com

 

[Chinto]

I ordered an aspen plus that I am just waiting on. I intend to wire up an led light bar. Any chance you have a good picture of the ncm headlight connector? I dont have my bike here yet and I want to try and have all the parts on hand to wire it up over the holidays.

 

[TheEqualiser]

I ordered an aspen plus that I am just waiting on. I intend to wire up an led light bar. Any chance you have a good picture of the ncm headlight connector? I dont have my bike here yet and I want to try and have all the parts on hand to wire it up over the holidays.

See FullyCharged's post above, on Apr 6, for close up photo of connector and link to installation instructions.

 

[Fred]

Very useful information, thanks!

Is the AXENDO also compatible?

AXENDO 80 - Spanninga Bicycle Lights

The AXENDO 80 headlamp for e-bikes has 2 high-power REBEL© LEDs, which give an impressive 80 Lux light output in a bright, but non-blinding, light beam.

spanninga.com

That light says 6V-36V. Not sure it would work with 48V.