2021 Turbo Creo SL Carbon EVO Headset Bearings

[Brew]

Greetings, I starting getting a pretty good creak from the headset area and also noticed the handle bars didn't turn so smooth.
I let a little pressure off of the two setscrews on the headset collar which seemed to help the turing however the creaking was still there.
So I pulled the headset apart and found the outside surfaces of the bearings were rusty and there was a bit of dirt on them, the fork tube and future shock tube. Cleaned everything up, greased it up, put it back together and adjusted it.
Works fine now with no creaking however I would like to have a spare set of bearings on hand just in case.
Anyone no of a source were these can be purchased?

 

[eddief]

Greetings, I starting getting a pretty good creak from the headset area and also noticed the handle bars didn't turn so smooth.
I let a little pressure off of the two setscrews on the headset collar which seemed to help the turing however the creaking was still there.
So I pulled the headset apart and found the outside surfaces of the bearings were rusty and there was a bit of dirt on them, the fork tube and future shock tube. Cleaned everything up, greased it up, put it back together and adjusted it.
Works fine now with no creaking however I would like to have a spare set of bearings on hand just in case.
Anyone no of a source were these can be purchased?

How about here?

Specialized Headset Upper or Lower Bearing (Roubaix/Ruby/Diverge)

This a lower or upper headset bearing. Compatible with Future Shock headsets. 45.8mm O.D. x 36.8mm I.D x 6.5mm. 45 x 45º. OEM part on the following... S182500006

www.performancebike.com

 

[Brew]

Thanks for that, I appreciate it! Looks like both the same size,

 

[Allan47.7339]

You can look up the common part numbers on https://support.specialized.com/turbocreosl/en/service-maintenance/replacement-parts and then search www.performancebike.com (Amain cycling) or webshop.bestbike.de. Usually one or the other will have a good illustration of the parts.