Search results

Does anyone know how the DPC-18 Display's Eco/Sport settings correspond with the 10 Limit Current (%) settings ( Assist 0 - 9 ) on the Basics page? I've read that assist 5 on the display for both modes correspond to assist 9 on the basics page but am trying to figure out which assist levels i...

Hey guys… Has anybody had a bike that originally came with a Canbus protocol Ultra motor and switched into and installed a Uart protocol Ultra motor? Are there any snags or gotchyas with installing the Uart motor where the Canbus was originally mounted? ( ie.. different mounts?) Is there any...

Hello.... Question for the guys riding on the beach? What size width ( and brand ) tires are you using for beach riding and how do you feel they perform? I have a friend looking for a used ebike for the beach and we are trying to figure out how wide of a tire he would need that will perform...

I dont have the bike yet but want to get it to ride on the beach and need wide tires.

(Message to Bafang forum) Hey Guys, how is it going up north? I was just contacting you to find out if you have any updates regarding Bafang releasing updated firmware versions for the Canbus Ultra Motor. If not, would it be possible for Biktrix to contact Bafang to see if they will provide...

Hey Guys, how is it going up north? I was just contacting you to find out if you have any updates regarding Bafang releasing updated firmware versions for the Canbus Ultra Motor. If not, would it be possible for Biktrix to contact Bafang to see if they will provide any fireware updates for the...

Heys Guys.... I am considering switching to a smaller front chainring on my Biktrix Juggernaut Ultra Beast for the stock 44T to a 39T. Roshan from biktrix mentioned that any smaller than a 39T there are chain clearance issues with the stock spider. I know Christini makes a 104BCD 4 bolt spider...

Heys Guys.... I am considering switching to a smaller front chainring on my Biktrix Juggernaut Ultra Beast for the stock 44T to a 39T. Roshan from biktrix mentioned that any smaller than a 39T there are chain clearance issues with the stock spider. I know Christini makes a 104BCD 4 bolt...

( I posted this in the Biktrix section, I am posting it here too since its really a Bafang issue. ) Hey Guys! So I received my new Biktrix Juggernaut Ultra Beast yesterday, assembled and tested it and was excited about hooking up the laptop to upload the current controller settings to see...

Hey Guys! So I received my new Ultra Beast yesterday, assembled, tested it and was excited about hooking up the laptop to upload the current controller settings to see what changes i would possibly make after riding it a little. When i disconnected the display port to hook up the programing...

Whasssup everyone!! I have A Juggernaut Ultra Beast on order for July... I am currently researching what torque settings / how other users are programing their Ultras. My plan is to get the bike, hook it up to the laptop and download/record the factory settings ( i'm not going to make any...

Hey Guys... What would you say the minimum cadence/pedal rpm would be to protect the BBS02 motor/controller from over heating? I noticed when my wife rides her cadence often is between 50 to 60 rpm while in pedal assist 2 and 3 ( out of 9). In comparison I generally always keep my cadence at...

Hello, I just ordered a Juggernaut Beast - The website says "Pre-Sale July Shipping". Has anyone ordered pre-sale before? Did the bike come sooner/later than the month specified? What was your experience? I am anxious to get the bike. Thanks

Is the Juggernaut Ultra 1000 and 1000 Pro Discontinued? Its not listed for sale on the website anymore. I was interested in buying a pro next winter.

Does anybody know what torque setting to use for the bolts to attach the chaining to the motor for the BBS02 on the Stunner X? I ended up using 110 inch pounds / 12.4 Nm. I am just curious if this is too much or too little. thanks I Just replaced the stock 42T chainring with a 36T Lekkie...

Does anybody know what torque setting to use for the bolts to attach the chaining to the motor for the BBS02 on the Stunner X? I ended up using 110 inch pounds / 12.4 Nm. I am just curious if this is too much or too little. thanks I Just replaced the stock 42T chainring with a 36T Lekkie...

So I received the stunner X 24" 40 days ago and put 180 miles on it so far. It shifts and operates well in low gear however I noticed when in low gear the derailleur was almost fully extended forward. I'm not a bike mechanic or manufacturer so I'm not 100% sure how "ok" that is... i'm sure it is...

Has anybody reprogrammed their controller? And if so what setting changes did you make and how were the results? I did a lot of research on programming before getting the bike and found these two gems…. https://electricbike-blog.com/2015/06/26/a-hackers-guide-to-programming-the-bbs02/...

Hello, I've received my stunner X 24" two weeks ago and have 70 miles on it so far. I am loving it. I'm 6'1" and it fits me well, i have the handle bars as low and forward as they go. My wife rides it, she is 5'4" i have to put the seat almost all the way down but she fits. It is a big bike...