Offset Saddle Adapter

[6zfshdb]

Yes, the adapter can be reversed to move the saddle forward. I have the same back issue and like an upright riding position. I use these back swept Jones H bars to keep from having to lean forward:

Jones H-Bar® SG 2.5 Loop Aluminum

The Jones SG 2.5 Aluminum Loop H-Bar retains the wide range of comfortable hand positions of the original Loop H-Bar, in a higher, 2.5" rise version.

jonesbikes.com

 

[Hewholaughslast]

All righty. Now I need to find the correct stem since the handlebars on folding bicycles is telescoping and often one solid piece, bars welded to stem. Gotta refresh my brain. Hope it's easier than anticipated.

 

[Hewholaughslast]

OK. My brain has just logged the photos you offered. Learning process since I am a less than one week Ebiker dude. It is nice that you can still adjust the angle of the seat with the modified extension gadget. I'm wondering now if I could use this to move my seat forward, closer to the handlebars? Just throwing this out there; do you think I can install curved cruiser style handlebars on my 16"& 20" folding bikes so I don't have to lean so far forward? I blew another cervical disc last Fall painting my ceilings and boy do my arms and neck hurt leaning forward.

Used as a spring like the product was intended, I doubt I'd get a half mile or 30 seconds out of it. Cut down and modified for an offset, as shown it the first post, I have 155 miles and 16 hours on it so far with no problems.

If your seatpost has an adjustment like these, yes, the seat angle can be changed:

View attachment 199687 View attachment 199688

If the seatpost is a "fixie" like this one, you will need an adapter:

View attachment 199689View attachment 199690

All righty. I just hit the 42 mile mark this week (on my new Ebike) and decided to try something I thought about when I assembled my bike the Sunday before last. I rotated the handlebar stem/post 180 degrees. Then put the handlebars back on. It moved the handlebars back about three or four inches and I did a test drive in the driveway/street and I like it. There is still room for my knees while pedaling and turning. Is that a sound idea or dangerous? Other bikes are on the back burner. Wondering if I should wear a bike helmet since I don't own one, yet. Huge selection, hard to know if expensive is better than cheaper?

 

[6zfshdb]

I've never tried it but others here have reversed their handlebar stems with some success. It can alter the geometry though, and won't work on all bikes. All you can do is try it on a longer ride and see how you like it. Be cautions when making turns until you get used to the change in dynamics.

I never wore a helmet when I was younger but the fear of mortality creeps in as you age. I started wearing one in my 40's and switched to a MIPS rated model when I got my first e-bike. The choice is a personal one and totally up to you. If you ride trails in National, and some state Parks, helmets are required. Also keep in mind, older heads heal slower than younger ones.

 

[Hewholaughslast]

Ya, I did notice a slight difference in the "geometry" or balance of the bike on my short test drive but can't recall if it was favorable or not. The next 14 mile ride is Friday, if I survive it, I'll report back. I got used to my 16" Dahon's fast steering response so even moving to a 20" folding bike had me all wobbly in comparison. I feel very balanced on my budget Ebike but am adjusting to the overall size and hopping off of the seat. I have not tried riding hands free in decades, even on flat ground. Might be that my cervical neck problems screwed up my equilibrium?