Is Vado Smoking Addictive?

[Slaphappygamer]

I need vado_vise.
How do you select bud for a mellow relaxing.. with no paranoia and minimal trippiń?
What THC:BCD ratio?
Here's my source...

New York Medical Marijuana Delivery | Vireo Health

Vireo Health is New York's leading marijuana delivery service. Place your order today and get products delivered to your door.

vireohealth.com

It's been a while and this is a far cry from a dime bag from the Rastà at the red door on W233rd St. 40+ years ago

Sativa strains can be pretty mild. You might want to try Sativa first. Indica are usually heavier. You could fall asleep indacouch. Give that a go, but pay attention to the THC%. 30 and higher and you will get very stoned.

I’m not too sure about the ratios, but a budtender could tell you all about it. I highly recommend you visit a dispensary. If you’ve never been there, you just check in (bring your ID) at the front desk and they will call you when a budtender is ready for you. Take your time and ask questions. The more info you give them, the better recommendations you can get.

I could tell you more, but a budtender can give first hand experiences with local strains. There are so many. Dispensaries also have deals all the time. I think vets get a discount, all year, for each purchase. As they should. So, if that applies, be sure to ask. I asked one guy “Do you have a CaliRoots discount?”. Expecting a stale “no”, I got “YES, good thing you asked. 20% off todays purchase”. I made a purchase and my wife made a purchase. Even got free swag for over a certain dollar amount.

 

[PCeBiker]

My old ebike was built for the European market,..

I was out to get groceries a couple days ago and the bike was fine on the way to the store, but on the trip home with 50 pounds of groceries, I noticed that my rear wheel was making a weird crunching kind of noise, kinda like rubber crunching with a metallic clicking noise as well ???

I found out that I had a broken spoke and my rear wheel was warped AF !!!

I managed to find 12 gauge 141mm spokes on Aliexpress, but it was eight bucks for ten spokes and nipples, I only needed a single spoke, and I'd have to wait a month,..

So I made a spoke,..

I torched up my broken spoke and made a hook, then used a BBQ Sqewer from the Dollar Store, lots of fire and tools, and fabricated a Fancy new spoke for my Fancy Ride,..

I had few , and a few Vados to help me think up how to make a spoke.

I might still buy new spoke, but new BBQ Sqewers are cheaper.



I also used my Grinder with a Cutoff disk to cut my my pipe bowl in half,..
It was way too long for a one shot,..

There's a song about it,..
"I Cut My Hash Pipe" by Toto

It's a cover song of a cover song that Weezer made lots of money from,..

With three tall cans of beer, and half a dozen bowls of Vado in me, the Grinding and Fire are WAY TOO FUN !!

 

[stompandgo]

I guess this makes you a manufacturer.

 

[PCeBiker]

This is the kickstand that fits my Stance...

Direct Mount 18mm KSA E-Bike Kickstand | Stable Support for E-Bikes - Giant Bicycles Canada | Giant Bicycles Canada

Keep your e-bike upright and secure with the Direct Mount 18mm KSA Kickstand. Designed for stable support, it’s perfect for e-bikes with a direct-mount system. A must-have for everyday riding. Free shipping on orders over $100 in Canada!

www.giant-bicycles.com

There's lots of universal fit kickstand on Aliexpress,..

Check Out The Blue One !!!
That's !!!

I bought one.
It might not fit my ebike because my pedals are higher off the ground, but I'll make it fit.
I bought some spokes too.

They might work better than BBQ Sqewers.

8

 

[Gionnirocket]

Man you fractured her...

 

[PCeBiker]

I guess this makes you a manufacturer.

I will call myself Sapin Spoke Manufacturing.
Not to be confused with any other spoke manufacturers,..

 

[PCeBiker]

Man you fractured her...

Yeah, but I fixed er up good

 

[PCeBiker]

A dork disc is more important than the low limit screw! I had one lady go over her bike and tighten everything, including the loose limit screws.

Dork disc replacement is an important maintenance item because they yellow with time and you want the bike to look new and there is no better way to do that than with a fresh shinny, clean, and clear dork disc. The larger the dork disc the better, ten inches and up.

View attachment 194937

I had no idea what those things were or what they did until you mentioned it a year or two ago.

I remember ripping them off of a few wheels as a kid. They always broke.

On a related note,..
On the day that I did this. (More than a dozen times. )

My chain actually got in between the freewheel and motor housing.
I thought I was going to have to cut the chain off with part of it still jammed in there?

The chain easily climbed back onto the freewheel.
(I forget whether I had to pull it out or just rotate the pedals forward?)

I think my Fat Motor might be Dork Resistant ??

 

[Stefan Mikes]

This is the kickstand that fits my Stance...

Direct Mount 18mm KSA E-Bike Kickstand | Stable Support for E-Bikes - Giant Bicycles Canada | Giant Bicycles Canada

Keep your e-bike upright and secure with the Direct Mount 18mm KSA Kickstand. Designed for stable support, it’s perfect for e-bikes with a direct-mount system. A must-have for everyday riding. Free shipping on orders over $100 in Canada!

www.giant-bicycles.com

Try it Dave and then tell me when it broke for the first time

 

[DaveMatthews]

Try it Dave and then tell me when it broke for the first time

No thanks. Like I say, no need so far.