Radrover up/down PAS buttons now do not change pedal assist level?!?

[cottersay]

The handlebar mounted control for setting the PAS level (0-5) on my 2018 Radrover fat bike will now only intermittently change the PAS level when pressed (it takes maybe 10 or twenty presses sometimes). Any ideas? Might it be just that the PAS handlebar control contacts are dirty? A bad controller? or

?​

PS: I have only 200 miles on the Rover, and it is never out in the weather.​

Thank you!​

 

[AHicks]

That switch is probably not the highest quality available. It can take quite a bit of pressure to make it work, and there are known issues trying to use it with gloves on when it's cold out.

Point is, it's most likely the switch itself. If this occurred when it was cold outside, warmer weather may cure it. They're weatherproof, so I don't think it's possible to clean it internally.

 

[Gordon71]

Early on I had some trouble with that but found pressing nearer the top of the up button and nearer the bottom of the down button took care of it.