Luna X1 stand

[osunick]

Because the X1 has carbon chainstays, there aren't good options for a kickstand. I picked up a couple of the clip on Upstanding and Corki stands that have a tab that either mount on a thru axle (or I have it on a Robert Axle Project thru-axle that has a threaded stud that is skewer sized for a bike trailer mount). They work great but the included mounts are for water bottle bosses which our bikes don't have. Solution- 3D printed mounts to clip on to either the seat post or seat stay. No compression, adheres with 3M double sided VHB tape. Hope this helps.

Luna X1 mount for carbon fiber Upstand or Corki bike stand by osunick

Because the Luna X1 has carbon chainstays, a clamp on kickstand is a bad idea. Without water bottle bosses, the normal clip for these bike stands also is not an option. I designed two options for a 8mm carbon fiber bike stand to clip into when not in use, one on the seat tube and the other on...

www.thingiverse.com

 

[PedalUma]

Nice.

 

[IOUZIP]

I was just getting use to throwing my bike down in the dirt.

How did you replace the rear skewer with the nut? I just came back from my first trail ride only to find when I got back to the parking lot the rear skewer was loose. I did not have any damage but OMG.

 

[PedalUma]

It is expensive and a wheel anti-theft trick.

Nutlock SKEWER REPLACEMENT Bike Wheel Locks (Front & Rear) - M5 x M5​

 

[osunick]

This is what I used actually, since it's also for a bike trailer:

12mm Thru Axle for Kid Trailer - The Robert Axle Project

Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet and cargo trailers such...

robertaxleproject.com

High quality, and lets you use an upstand or similar for a normal QR skewer. Just torque the thru axle first and then hold it in place and tighten the nut with a wrench to where the included peg doesn't rotate very easily.