I looked at the Wolf Tooth. I'm at a loss as to what to order. Where would I find the sizes of the top and bottom bearings, etc?
Luna M600 v2 Controller Tuning Thread
- Thread starter IOUZIP
- Start date
First fitment question is Headset type. External Cup, Zero Stack, or Integrated. Then I need the Upper and Lower headset tube measurements inside diameter and the Steerer Tube outside diameter Upper and Lower... Do you think Luna knows this stuff? Or would I have to go to Rockshocks for the steerer tube. The headtube would be the Dengfu carbon right?
IOUZIP
Active Member
- Region
- USA
I made a post about my upgrade to the 1 deg offset cup. It did make a difference. The stock fork angle is 66 degrees. I changed it to 65 with the Wolftooth headset.
electricbikereview.com
Wolf Tooth Offset Headset.
If you just want to stick with the stock geo. Headset ZS44/28.6 Upper, ZS56/40 Lower/Long 115-140 mm
Wolf Tooth Web Site for the headset. You will need 1 upper ZS44U-5MM-BLK-B and 1 lower ZS56L-40-BLK-B
www.wolftoothcomponents.com
Luna X2 - First Impressions
This should probably be a new thread, but I don't know how to start one. Front brake problem with, Luna Cycle X2 with DNM Suspension. I only have about 400 miles on my new, Dec 20 2021 picked up on Dec 22 2021. My front brake was not stopping as well as it had earlier, so I ordered a set of...
electricbikereview.com
Wolf Tooth Offset Headset.
If you just want to stick with the stock geo. Headset ZS44/28.6 Upper, ZS56/40 Lower/Long 115-140 mm
https://www.amazon.com/Wolf-Tooth-Performance-Upper-Headset/dp/B089QVFSMK?ref_=ast_sto_dp&th=1&psc=1
Wolf Tooth Web Site for the headset. You will need 1 upper ZS44U-5MM-BLK-B and 1 lower ZS56L-40-BLK-B
Wolf Tooth Performance ZS Headsets - Zero Stack
This Wolf Tooth Premium ZS Headset featuring Enduro stainless steel bearings and custom designed seals is for frames that use Zero Stack headsets. Available in a variety of colors to add style to your bike.
www.wolftoothcomponents.com
Last edited:
IOU you are a wealth of knowledge. Just to double check, since my bike is a later production, are the forks the same on your bike and mine as far as fitment? I have the Rockshock Debonair Yari.I made a post about my upgrade to the 1 deg offset cup. It did make a difference. The stock fork angle is 66 degrees. I changed it to 65 with the Wolftooth headset.
Luna X2 - First Impressions
This should probably be a new thread, but I don't know how to start one. Front brake problem with, Luna Cycle X2 with DNM Suspension. I only have about 400 miles on my new, Dec 20 2021 picked up on Dec 22 2021. My front brake was not stopping as well as it had earlier, so I ordered a set of...
Wolf Tooth Offset Headset.
If you just want to stick with the stock geo. Headset ZS44/28.6 Upper, ZS56/40 Lower/Long 115-140 mm
https://www.amazon.com/Wolf-Tooth-Performance-Upper-Headset/dp/B089QVFSMK?ref_=ast_sto_dp&th=1&psc=1
Wolf Tooth Web Site for the headset. You will need 1 upper ZS44U-5MM-BLK-B and 1 lower ZS56L-40-BLK-B
Wolf Tooth Performance ZS Headsets - Zero Stack
This Wolf Tooth Premium ZS Headset featuring Enduro stainless steel bearings and custom designed seals is for frames that use Zero Stack headsets. Available in a variety of colors to add style to your bike.
The play in my steerer tube feels like it is coming from the lower bearing. I would order upper and lower I would think. Is this going to require some special tools to install. I'm pretty mechanical, but I don't have the tools shown in the offset video... The Amazon link for the stock Wolftooth is just the upper right?
So, I removed the fork this morning. As I did, the lower stem bearing came out in pieces. I know this was like this from it's origin at Luna because when I got the bike the steering was stiff. I worked on the adjustment of the stem many times and could always feel the free play at the bottom of the stem tube and the steerer tube. I replaced the bearing and all is good now. I informed Luna about the error in installation of the fork...
Similar threads
