Flat pedal (no-pins) recommondations?

[Base]

For non pin grippy pedals, the MKS Lambda commuter pedal has long been recognised as very comfortable. Have a pair on one of my bikes for years and they are very good indeed. Rivendell do a slightly snazzier version for the American market as well.

View attachment 204961

I'd go for the

LAMBADA Ezy Superior​

those can be taken of the bike for transport (or taken them of as an extra safety measure) and indeed those are comfy (are on the Brompton Ralph T and the Tern bikepacking folder's)

 

[Rás Cnoic]

I'd go for the

LAMBADA Ezy Superior​

View attachment 204963

those can be taken of the bike for transport (or taken them of as an extra safety measure) and indeed those are comfy (are on the Brompton Ralph T and the Tern bikepacking folder's)

You can unscrew them by hand? Is that it? Never seen that. Very interesting!

 

[Base]

this part is fixed to the crank

works like the bajonet system like on pneumatic or hydraulic hoses.

so when the bases connector is screwed into the crank you use any EZY pedal with it:

or the Promenade (also a very comfy and longlasting pedal)

the yellow clips are used to secure the pedal, you would need to remove that before you can open the quick release.

We sold a ton of those when I was working in a bike-travel orientated bikeshop, for both the R&M Birdies and other travelbikes. Very easy for flights etc to just unclip the pedals (and have a choice on what to ride) prior to packing the bike in a flight-box/carton wrapper.

(picure is an English folder, just not a Brommy)


there are even specials for holding one pedal on the rear axle nut on a Brommy

 

[Rás Cnoic]

this part is fixed to the crank
View attachment 204964

works like the bajonet system like on pneumatic or hydraulic hoses.

so when the bases connector is screwed into the crank you use any EZY pedal with it:

View attachment 204965

or the Promenade (also a very comfy and longlasting pedal)

View attachment 204966

the yellow clips are used to secure the pedal, you would need to remove that before you can open the quick release.

We sold a ton of those when I was working in a bike-travel orientated bikeshop, for both the R&M Birdies and other travelbikes. Very easy for flights etc to just unclip the pedals (and have a choice on what to ride) prior to packing the bike in a flight-box/carton wrapper.

(picure is an English folder, just not a Brommy)


there are even specials for holding one pedal on the rear axle nut on a Brommy

View attachment 204967

Very cool, very interesting. I'd seen similar in pics of Bromptons but hadn't realised they were a number of options like this.

 

[Base]

they have the two options, EZY and EZY superior

Ezy Superior | MIKASHIMA INDUSTRIAL CO,.LTD

www.mkspedal.com

Ezy | MIKASHIMA INDUSTRIAL CO,.LTD

www.mkspedal.com

on our folders and on my Raleigh travelbike (indeed older steel model with the same geo as the Dawes Sardar... where would that design have come form ) I do run those EZY adapters and I can switch the pedals around for what we are riding.

 

[stompandgo]

How much does that capability affect the Q?

 

[Base]

they calculated that in. so the pedals are almost identical in actual axle size

 

[RunForTheHills]

I have the EZY Lambadas on my wife and I's Bromptons. The quick release is very frustrating to use because I don't take pedals off very often and can never remember which way to twist it.

 

[Rás Cnoic]

Curious, I just looked at the MKS (Japan) website, I have a soft spot for these old engineering websites, legendary Nitto handlebars are another Japanese one - "Fashion? Who needs fashion, we're engineers!" some long established Taiwan cycling parts companies have similar looking sites. Anyway came across the MKS 'Gamma' the higher specced Lambda pedal developed with Rivendell. Looks lovely.

GAMMA | MIKASHIMA INDUSTRIAL CO,.LTD

www.mkspedal.com

 

[Mr. Breeze]

Thanks for the suggestions!
Funny thing, I had put a set of Race Face Ride pedals on my wife's Levo 5 years ago to prevent her from getting the inevitable leg wounds (she has since decided she prefers city bikes over MTB so I have since sold the bike on Upway).

While the MKS models are interesting, I think I'll try a set of the Crank Bros Stamp 0 (as I ride the Stamp 7 on my Amflow) or the Race Face Ride.

Thanks again!