Recently purchased a used Big Cat Long Beach Cruiser with a bad battery. Bought new battery and installed; and bike runs great. The C961 display works; but gives bogus speed display. Going at full speed (22mph clocked) the display reads 1.6 mph. That 1 point 6 mph. The trip meter also is incorrect. Display is set for mph; and the tire size setting is correct. No error codes show. It has a hub motor; and no speed sensor that I can see; other than the cadence sensor on the crank. Any ideas?
C961 Display problem
- Thread starter romo5000
- Start date
smorgasbord
Well-Known Member
- Region
- USA
See this page for C961 display configuration for your bike:
If tire size is indeed correct, but MPH and trip odo are wrong by the same amounts, then there's likely something wrong with a wheel sensor. Hub motored bikes don't normally have external wheel magnets, so not much you can do. Have you tried contacting Big Cat?
Configure your Bafang C961 Display on your Big Cat Electric Bike
JUST BOUGHT A BIG CAT ® ELECTRIC BIKE? Did you know how to unleash the full potential of this great electric bicycle by Big Cat ®? If you do, that's awesome. Kudos to you! If you don't, then grab a pen to take some notes, or save yourself the time and print this out! FOR STARTERS: The Big Cat ®...
www.bigcatbikes.com
If tire size is indeed correct, but MPH and trip odo are wrong by the same amounts, then there's likely something wrong with a wheel sensor. Hub motored bikes don't normally have external wheel magnets, so not much you can do. Have you tried contacting Big Cat?
Last edited:
Thanks for the reply. Big Cat isn't much help. They wouldn't even send me a wiring diagram for the bike. Said they didn't have one. Couldn't supply me with chain guard either. If the issue is in the motor; I'll just live with it. It's an older bike I got cheap due to the dead battery.
