Battery placement?

[dpayne]

Trying to see if a shark type battery will fit in my new bike. I made a mock-up. What do you think?

 

[harryS]

May be too tight. They have to slide into the cradle.

I've never owned a Shark. I use the older, and harder to find, Dolphins. Those slide about 1/4" -3/8" forward a before they can be removed. And they need to come up at least 1/4" too/

 

[dpayne]

May be too tight. They have to slide into the cradle.

I've never owned a Shark. I use the older, and harder to find, Dolphins. Those slide about 1/4" -3/8" forward a before they can be removed. And they need to come up at least 1/4" too/

Yes I saw that, my old shark needed to go forward .44 mm and then up at least .18 to clear the notches inside. The bottle screws are still here so it could be a little closer to the frame. I knew it would be difficult.

 

[dpayne]

I found a battery that fit but cannot any available.
Hailong 2 mounts from the side.

 

[tomjasz]

Email [email protected] ask for a side release Hailong. Also, ask to upgrade to PURE NICKEL connections and a balancing BMS.

 

[dpayne]

Email [email protected] ask for a side release Hailong. Also, ask to upgrade to PURE NICKEL connections and a balancing BMS.

Thanks