20mph cutoff?18-19mph cut off speed and a 250wh battery for 13.500$ ??? No, thanks.
Sure ,makes sense .Well if you ever test one of those on a hill I would be interested in your take on it.Thanks Steve, I find that bike interesting but not sure I want a fixed gear bike. I will have to think about why I want an electric bike though as ultimately maybe I don't need the motor at this time. Several years ago I got the electric bike because I was commuting to work and needed to rush back home in a reasonable time because I had to pick up kids at daycare. Those days are over now as they're in their teens. So I can ride home slowly most days if I wish.
But the other reason I thought a motor would be nice is that I have some friends who race Cat 3 and on longer rides say 70km's to 120 km's I have trouble keeping up on the hills. Generally the flats are ok as I can just sit on wheels. It's the hills where I get dropped so I don't see this fixed gear electric bike suiting that purpose, but it probably works fine as a commuter.
Will have to give it some further thought but my initial reaction is that it's close but not quite there.
Yes that seatpost is very interesting ,thanks for your input!I test rode a custom painted base version ($6999 before tax) yesterday and I felt it got along pretty great.
I'm a clydesdale rider (6'4", 245 pounds) and while it wasn't even close to my size, I was impressed by its ability to move me quickly right up to the limit over flat ground. I was able to get up in the big ring and run between the top 2 cogs easily. I would normally be riding the small ring this time of year on an analog bike, so this felt awesome! The slight hills here were not an issue as long as you were sensitive to the being in the right gear, with plenty of assistance in both river, and rocket mode. It was very smooth both in activation and top out, with no surges or jerks. I could barely hear the motor at all, even in the top or "rocket" mode.
I do think I could do a group ride with this motor. I verified it topping out at (slightly above) 20 mph, but that seemed completely adequate, or maybe even too fast for the NYC/Manhattan streets & bike paths, but maybe I'd feel different outside of this area.
The bike itself was very nicely built, and I was truly impressed by Trek's cable management, and overall fit and finish. Very slick. It had no rattles, and I really like Trek's iso-speed seat post. The base level Domane+ LT is a much better deal than the 7 or 9. It is equipped with Full Ultegra (not Di2, but shifts very nicely anyway) and DT Swiss alloy wheels with straight pull hubs/spokes.
I don't know that I'd spend my money for dura-ace on any e-bike, maybe carbon wheels though. I think the achilles heal for this one might be the battery size/efficiency.
I haven't ridden Ebikemotion yet, anybody have any comparison experience of the USA class 1 version?
I still need to try the Creo, but this one might be in the hunt.
was able to get up in the big ring
I think he's referring to the Domane which has two chain rings up front.
Ty, i didn't realized that the + LT does have double crankset. That is probably the only real benefit compared to the +HP.
just
I think he's referring to the Domane which has two chain rings up front.
Correct, Fazua is NOT Chnese, they are German. However like just about every manufacturer of anything in the wold these days they have custom manufacturing of parts in Asia.That and the fact that the bike can double as a regular, non-electric road bike. Now I know you've been all over the forum claiming this isn't possible. And if you are correct, then it isn't just the motor manufacturer (Fazua - who you claim is Chinese) lying to us but also the manufacturers who are building bikes using the system. As this is from Trek's marketing:
That and the fact that the bike can double as a regular, non-electric road bike. Now I know you've been all over the forum claiming this isn't possible. And if you are correct, then it isn't just the motor manufacturer (Fazua - who you claim is Chinese) lying to us but also the manufacturers who are building bikes using the system. As this is from Trek's marketing:
View attachment 46634