1.0 battery discharge pin bent

[L Weaver]

Lectric 1.0 bike

On the battery itself one of the Female pins is bent. (Making the battery pretty non functional)

what are my options for repairing/replacing the pin, or is there an option to replace the top of the battery containing those connectors?

thanks!

 

[Johny Rocket]

You will need someone with good soldering skills and understanding of high power battery handling. This is the link for the standard battery connector but the vendor carries the step thru version as well but you'll have to look through their store

https://www.aliexpress.com/item/3256802838303892.html

 

[L Weaver]

Thanks. I do have good soldering skills, but will need to study high power battery handling.

 

[Johny Rocket]

Thanks. I do have good soldering skills, but will need to study high power battery handling.

It's like a car battery, keep the two leads isolated from each other.

 

[harryS]

Doesn't the Lectric battery use an on.off switch? Verify it works, then you can work on the connector.

These connectors are almost always OEM parts for battery cases. If you can identify it on the sellers page, buy it.

 

[Johny Rocket]

Doesn't the Lectric battery use an on.off switch? Verify it works, then you can work on the connector.

These connectors are almost always OEM parts for battery cases. If you can identify it on the sellers page, buy it.

The battery itself doesn't have an On/Off. There is a key that turns off the power on the battery itself but it is part of the assembly L Weaver is replacing.

 

[L Weaver]

Battery connector is replaced, works great. lectric had a 30 amp fuse that I needed to add (it’s an extended battery, not sure if that is why). Thanks for all the help.