Show Us Your Bikes

[slow ride]

That is a beautiful saddle. Although I would not advise it for the Portland nude ride as a precaution to prevent anything getting caught in the spring coils.

I use lanolin and only under and with a heat gun then place it on the floor and stand

View attachment 201450View attachment 201451View attachment 201452

Flush Copper rivets..nice

 

[PedalUma]

This one has a Bafang HD motor. That is the one with 160Nm of pull. Normally they are a mess of wires at the handlebar. Zoom this bar.

 

[GMA52]

Best saddle I have tried so far.......The Cup

View attachment 201105

View attachment 201106

View attachment 201107

That is a very nice looking saddle. If mine was step through I would grab me one. On mine I have to have a seat with a medium size nose and pushed back so I can get my leg over as my issues are short legs/long torso, arthritis in hips and 90% lumbar fuse. It would probably have been better if I got a step through but on the brand I bought they did not have the power mine has and I do like a little power on the hills etc.

 

[PedalUma]

step through

A guy in 2018 brought me his bike to make into a step-thru. He asked me to remove the toptube.

 

[PedalUma]

It is like making the Brooklyn bridge into a flat bridge by removing the towers and cables. Come to think of it those towers and cables on the Golden Gate do block the view.

 

[usclassic]

Small the Proofide tin is .....lol

 

[slow ride]

Small the Proofide tin is .....lol

View attachment 201478

it lasts forever though at least haha

 

[PedalUma]

Small the Proofide tin is

I thought it was just a giant quarter.

On the other hand miniature quarters are used for selfies on dating sites.

 

[John Bowman]

 

[PedalUma]

Those kits last about three years max. That could be the Oxnard area.

 

[John Bowman]

Those kits last about three years max. That could be the Oxnard area.
View attachment 201522

Not a kit, complete new bike. Rear hub motor. Electrics made in Taiwan by CT Green Tech.

TAKE-E ebike 電動自行車 CT Green 喜特綠能

About us

www.ct-green.com

 

[PedalUma]

It sure makes installation easy. Yes, I have worked on these. The controller is in the bottom of the battery holder and the display, On/Off, power level is on top of the battery. The cells go flacid sagging to nothing within 18-months to three years, requiring another $420 battery. Sometimes both a new battery and holder/controller are required because of updates. This is a newer one, maybe '24 or '25. Even if you stroke it with feathers and play Luther Vandross and take a little blue pill, nothing.
I went to buy a beer today and got carded. I said I was born 09/09/99. The guy said I was lying. I said, 'Then I am old enough.'
I want to show my most recent bike but it does not work. It is beautiful but crazy. It has a faulty controller and the new one arrives Thursday.

CT Green Tech

 

[John Bowman]

It sure makes installation easy. Yes, I have worked on these. The controller is in the bottom of the battery holder and the display, On/Off, power level is on top of the battery. The cells go flacid sagging to nothing within 18-months to three years, requiring another $420 battery. Sometimes both a new battery and holder/controller are required because of updates. This is a newer one, maybe '24 or '25. Even if you stroke it with feathers and play Luther Vandross and take a little blue pill, nothing.
I went to buy a beer today and got carded. I said I was born 09/09/99. The guy said I was lying. I said, 'Then I am old enough.'
I want to show my most recent bike but it does not work. It is beautiful but crazy. It has a faulty controller and the new one arrives Thursday.

No, separate display control panel. I already have 18 months on mine. This is not Chinese crap.

 

[PedalUma]

separate display control panel

Okay, it looked like another system then.
Here is a 2007 Specialized Crossroads commuter, comfort, gravel bike that I just made electric. The display wire is through frame.