We recommend you to check connectors of the bike are fully inserted on the speed dongle.
We had in the past a couple of persons reporting the same problem and finally it was solved, connecting and disconnecting cables on the dongle until the get fully inserted.
Our extender just add its capacity to the ebike, so it´s like your ebike has a bigger battery, but your ebike don´t know there is an external battery installed.
If you charge your ebike and the extender to 100% and start a route with booth batteries switched on, then you can check the total...
After some days without stock, we have some units of the new version of the range extenders, back to stock again on the shop.
We have new version in stock for 252Wh and 378Wh.
You can use the extender is all these cases. No mater how much charged is any battery.
Battery with more charge will be the battery used until both batteries gets equaled, and then they will work together.
The best way to use our extender is with both batteries fully charged since the...
Speed dongle intercepts the speed signal and modifies it. Thats the reason it appears a different speed on the Garmin. As you said, you have to read the speed, with the GPS signal on the Garmin.
If you starts riding with both batteries at 100%, Volabike extender works in parallel with the internal battery. Both batteries are working together. There is an electronic for controll this operation in our battery.
We recommend allways use our extender this way, because motor load is shared by...
Yes, connectors are the same on all ebikemotion systems.
For example, that´s the 378Wh model on a S size Orbea Gain. It has almost the double of Wh than the original model (208Wh). Installation is just install the battery cage with 2 screews and connect the extender to the charger port.
For...