Recent content by ebikerr

I had to remove the rear cable, but when I fit it back, it was quite difficult, and in 5th gear I can hear that typical sound when it appears that the shifter needs more slack on the cable. I find attaching the cable extremely tedious and fiddly. Any tips on getting it right the first time? Some...

Thanks, a 48V 10ah battery costs quite a bit less than what priority sells it for. I am wondering is it possible to buy the controller separately. Dual battery controller systems do exist for other bikes with barrel plugs, but the wiring connectors inside the motor housing do seem non standard.

After the forum came back up, I see that the subsection no longer exists, and all my threads and posts are gone too!

I was looking at 52V Ebike batteries on amazon and 500wh cost ~200$ and can be mounted to draw tube. I was thinking of attaching it to the barrel plug i.e charging while running. This is like riding the bike with a charger running continuously. Stock charger is 54V, so its going to charge...

quoting for attention. There are different widths available. Which one should I choose?

Does the standard size fit, or do we need to buy the oversized? I see two sizes on amazon

Hi, Can you give me more details about the size you chose etc., Will going for longer stem help. what are the dimensions I should choose for priority current

The rear brakes work now. I am just wondering what part should I swap so i can keep using the 180mm rotor? Or should I switch to 160mm rotor?

Okay, so I should definitely avoid hard braking on the rear wheel. The bike runs nice though, and hopefully it will last beyond warranty period. Looks like some parts are not carefully thought out?

Its been a couple of months since I got the new wheel. Works good now. Same design though. I am using my rear brake less and less though. Decided to get it fixed at the bike shop,. but did the final mounting on the bike myself. Getting the dots to line up at 3 was a bit tricky, but it worked out...

Yes, they are sending a wheel. I asked for an assembled wheel with ROTOR so I can fix it myself, but they are sending just the bare wheel and I will use my old rotor. So I have to go to the bike shop.

I have asked them about new wheel. They do seem bummed that the bike shop charged me 40$ to remove wheel inspect and then say its cannot be fixed without a new rear wheel. I guess bike shops do charge labor even if something is unfixable due to no fault of theirs. Went to Off Ramp in Santa Clara.

Priority sent me the parts and asked me to go to local bike shop. However when we opened up the wheel they said it cannot be installed as the hub threads are damaged. The bike shop also said that the part used is very poor quality and showed me Shimano OEM part which is supposed to be used with...

Priority wants me to go to a bike shop once I get the parts and then send them the bill and they will refund!

This is what Priority says THe Adapter fits the 6 bols to center lock then the locking holds everything together. I'm replacing those two parts. I have it packed 2 day air waiting for pick up. They are sending me both the adapter and the center lock ring