Im new here and have a voltbike 750 yukon with the 10 amp hour battery i bought used this past spring. The bike was great til it stopped running two weeks ago. Went for a ride washed it down as usual. Next time go to ride no power black screen. Battery seemed to take a charge, took it to an electrical shop tested just fine. Voltbike thought maybe a bad connection so i bought a new ignition and wires but no difference. today took out controller all lines seem to be good nothing seems burnt. Grey/red wire and brown/red wire from controller not hooked to anything. Single brown wire from other side not hooked to anything. Anyone have any ideas?
Voltbike Yukon battery tests good but no power.
- Thread starter dakroeker
- Start date
i think the screen is black because no power is coming thru, i have a second display and controller button, made no difference
i guess i would do that with a meter pos and neg lines at the controller?
ok there is power to the controller, also the negative connector was damaged and barely connected so i fixed that but still no power
thanks man pretty much identical situation and i just ordered a controller this am gonna call back and get the line from the display thanks again
