Voltbike Enduro Rear Suspension

[luitjens]

My enduro came with an A5-RE suspension. I only see a single adjustment valve. The suspension is either super stiff (i.e. no sag) or has no rebound. Is it possible I have a bad shock? What PSI do you run?

 

[Ebikefevercure]

My Enduro is in transit for delivery in the next day or two. I was hoping someone answered. I'll find out myself soon.

 

[Seepirate]

My enduro came with an A5-RE suspension. I only see a single adjustment valve. The suspension is either super stiff (i.e. no sag) or has no rebound. Is it possible I have a bad shock? What PSI do you run?

I run 175 PSI and works well. It is very sensitive to pressure a few lbs either way makes a huge difference. Try making smaller adjustments around the 175 PSI area. A little trial and error will find your number.

 

[Feliz]

I run 175 PSI and works well. It is very sensitive to pressure a few lbs either way makes a huge difference. Try making smaller adjustments around the 175 PSI area. A little trial and error will find your number.

If you're still around how much do you weigh? Thanks.

 

[JPWhistler]

Voltbike Enduro: About the rear shock pressure....I weigh 70kg and have it set between 110 and 120psi. That gives me about 25 to 30% compression when I am just sitting on the bike.

I have had the bike since December 2018 so not too much riding yet but almost all on Sunshine Coast trails. It came with a 44 tooth chainring and I switched it out for a 36t. Much better climbing and I can keep my rev's up while climbing up steep trails so it is easier on the motor as well.
JP

 

[fixercqi]

I don't have one of these bikes YET, but I expect that the rear shock is pressurised to the max at factory so you can just bleed a little off until its right for any rider. Saves you having to get a pump before you can get that all important first ride in.