Throttle does not come back to its original position.

[zendttt]

The throttle won't come back to its original position and keeps accelerating non-stop. It looks like the spring/string is broken. Any idea how to solve this issue?

 

[Bitmugger]

Replacements are only $25cdn from Leon Cycle Canada

Das-Kit Throttle for NCM Moscow Plus eBike | Leon Cycle

Das-Kit Throttle for NCM Moscow Plus eBike Powered by Leon Cycle. Shop now and get free shipping on all orders.

leoncycle.ca

Das-Kit Throttle for NCM Prague & Moscow eBike | Leon Cycle

Das-Kit Throttle for Standard NCM Prague & Moscow eBike Powered by Leon Cycle. Shop now and get free shipping on all orders.

leoncycle.ca

 

[Ocbman1]

I made a YouTube video on spring repair.

 

[Fred]

Or...this one from Amazon should work...but you need to be patient.
https://wwwamazon.ca/dp/B0B4WCZVF3/?coliid=I1ZU76V2PO5L8X&colid=2F5WH7ZW2PXV&ref_=lv_ov_lig_dp_it&th=1

 

[Ocbman1]

The one on Amazon will work but you have to splice it to the old plug. You can buy the other connection and save a dollar. I believe it’s the same color code. The one that comes with it is male. This is also available on AliExpress for $10, but you have to wait.

 

[Ocbman1]

Replacements are only $25cdn from Leon Cycle Canada

Das-Kit Throttle for NCM Moscow Plus eBike | Leon Cycle

Das-Kit Throttle for NCM Moscow Plus eBike Powered by Leon Cycle. Shop now and get free shipping on all orders.

leoncycle.ca

Das-Kit Throttle for NCM Prague & Moscow eBike | Leon Cycle

Das-Kit Throttle for Standard NCM Prague & Moscow eBike Powered by Leon Cycle. Shop now and get free shipping on all orders.

leoncycle.ca

Plus shipping which is another $25

 

[tomjasz]

Plus shipping which is another $25

That’s insane!

 

[RangerRik1]

I have been unable to find a replacement throttle for my NCM Prague. Leon Cycles simply does not answer phones or emails and don't respond to left messages. What has happened to them? I've had a bike down for months because of a busted switch.

Anybody have any suggestions? I have tried other "bafang" throttles off of amazon (like the one in this thread) with the three-pin female connector. But none of them will work with my NCM stock controller/display... Is there a simple wiring change I can perform? Thanks for any advice!

 

[fauconnier]

I did it, It's possible and relatively easy to do if you can solder. Open the throttle and switch the wires until you get what you want. Be very careful, because one of the possibilities is full throttle.