Smart Control or: How I Learned to Stop Worrying (and Love My Vado)

rochrunner said:
I guess I am such a person ;) . I'm going to post more details in the Club thread, but I went on my first "realistic" (for me) ride with the 4.0 a couple days ago: 50 miles on a loop with mostly unpaved roads and rail-trails (no MTB stuff). I had it on a low Eco setting (15/30) the whole time and rode 10+of the miles in Off mode, keeping it at an enjoyable ~15mph max pace (except downhill!). When finished my overall average was 12mph and I had 43% battery remaining.
Click to expand...
Rochrunner, does the figure for average assist or support(?) seem right to you? When I ride with assist off most of a (short) ride and use max boost at the beginning and end only (big hill), it still seems to report a large average support ... always over 100%, often over 150%... seems wrong for 5 minutes of boost on a half hour ride.
 
Nxkharra said:
I have tried to turn the assist to 0 or turn off the motor and ride. Just can’t do. To hard for me. Feel like bike is in break mode.
I either have ebike leg (most likely) or my Vado 5 motor is preventing this.
Click to expand...
The bike does feel more sluggish to me, but pedaling at <15mph it's no different to me than any heavier bike. Of course it's worse on a soft surface. Of course, if I'm speeding along with assistance when I switch to Off, it gets tough because I can't pedal a bike like that at 18 or 20mph, but I usually don't ride that fast even on my road bike. Also when you say "turn the motor off" you don't mean turn off the power, right? I'm just pressing the "-" button when in Eco mode and the display changes from Eco to Off.
 
Art Deco said:
Rochrunner, does the figure for average assist or support(?) seem right to you? When I ride with assist off most of a (short) ride and use max boost at the beginning and end only (big hill), it still seems to report a large average support ... always over 100%, often over 150%... seems wrong for 5 minutes of boost on a half hour ride.
Click to expand...
Where are you seeing those averages? I have a Garmin Edge on the bike that I use for recording my rides and don't use Mission Control on the ride -- only for setting the assistance levels. The bike does broadcast cadence and power that can be picked up by the Garmin, but not any e-bike-specific data.
 
rochrunner said:
Where are you seeing those averages? I have a Garmin Edge on the bike that I use for recording my rides and don't use Mission Control on the ride -- only for setting the assistance levels. The bike does broadcast cadence and power that can be picked up by the Garmin, but not any e-bike-specific data.
Click to expand...
Those numbers are from mission control's recording. Never used a Garmin.
 
rochrunner said:
The bike does feel more sluggish to me, but pedaling at <15mph it's no different to me than any heavier bike. Of course it's worse on a soft surface. Of course, if I'm speeding along with assistance when I switch to Off, it gets tough because I can't pedal a bike like that at 18 or 20mph, but I usually don't ride that fast even on my road bike. Also when you say "turn the motor off" you don't mean turn off the power, right? I'm just pressing the "-" button when in Eco mode and the display changes from Eco to Off.
Click to expand...
Thanks for good explanation.
I have tried changing the display by pressing - to no assist, and also turning the power totally off.
If I recall correctly turning to motor/battery off gives you a HEAVY bike feel. Turning the assist level to no assist by pressing - gives you a feel that the motor is resisting.
Mystery to me so I just ride on Eco if I want a workout as opposed to ride around for fun.
 
Art Deco said:
How do you get m/c data into a post anyway? I'm using a samsung phone and tablet that doesn't have a prtscr function available AFAIK.
Click to expand...
On your phone, try pressing the power and volume down buttons at the same time. Works for me.
 
Nxkharra said:
I have tried to turn the assist to 0 or turn off the motor and ride. Just can’t do. To hard for me. Feel like bike is in break mode.
I either have ebike leg (most likely) or my Vado 5 motor is preventing this.
Click to expand...

I turn mine off regularly during my commute. Several of the bike routes through the city are speed metered to match the traffic lights at 13 mph. I’ve found that on the flats even with the lowest boost I have a hard time going that slow while maintaining a comfortable cadence. I don’t notice any drag on the driveline. It just feels like a very heavy bike.
 
Safety2nd said:
I turn mine off regularly during my commute. Several of the bike routes through the city are speed metered to match the traffic lights at 13 mph. I’ve found that on the flats even with the lowest boost I have a hard time going that slow while maintaining a comfortable cadence. I don’t notice any drag on the driveline. It just feels like a very heavy bike.
Click to expand...
That's one reason I turned my Eco setting down. With the default setting and riding with my wife on her Trek set to Eco, I had trouble going slow enough to match her. Her Trek does have four levels, so her Eco can be quite low and she can just up it to Tour for more typical conditions. You can't change the Trek settings, which is one reason why I was attracted to Specialized.
 
rochrunner said:
That's one reason I turned my Eco setting down. With the default setting and riding with my wife on her Trek set to Eco, I had trouble going slow enough to match her. Her Trek does have four levels, so her Eco can be quite low and she can just up it to Tour for more typical conditions. You can't change the Trek settings, which is one reason why I was attracted to Specialized.
Click to expand...
I think there is some small resistance when boost is set to "off", but yeah, it's really like riding a heavy bike. Turning down the Eco settings is probably a better move, and what I'll do next instead of "off". Don't want to turn the battery off, lose lights, be fumbling for the switch etc.
 
In your first post your show a screen shot from Mission Control, but then near the end of the post you show a screen shot of a map that shows your route and to the left there is a summary of your ride. Obviously there is some software there displaying the stats of your ride. What software is that? It's not Mission Control.
 
By the way, this is really interesting as I used Smart Control for the first time about a month ago. Except I didn't choose distance, I chose HR and I similarly found the efficiency to be outstanding. In that case it was 45 wh used to travel 70 km's. I wanted to go faster to have more motor assistance but I kept dropping my ride companions who for some reason just wanted to ride slowly that day.
 
Captain Slow said:
In your first post your show a screen shot from Mission Control, but then near the end of the post you show a screen shot of a map that shows your route and to the left there is a summary of your ride. Obviously there is some software there displaying the stats of your ride. What software is that? It's not Mission Control.
Click to expand...
That's Endomondo.
 
Captain Slow said:
By the way, this is really interesting as I used Smart Control for the first time about a month ago. Except I didn't choose distance, I chose HR and I similarly found the efficiency to be outstanding. In that case it was 45 wh used to travel 70 km's. I wanted to go faster to have more motor assistance but I kept dropping my ride companions who for some reason just wanted to ride slowly that day.
Click to expand...
Very Interesting... a heart rate monitor...HR?
 
Art Deco said:
Hopefully, someone will test it on a hilly route and report back. I've got the hills but lack knowledge of the real range I'm getting.
Click to expand...
I was inspired by this thread to test Smart Control on my regular short ride today. (About 5.5 miles, several long shallow hills, MUP, higher intensity - for me.) There was a 10+ mph head wind going out. I used the distance option, setting for 5 miles, 150 feet climb, speed 15 mph (my past analog hard ride speed) 10% battery left. I was down to 28% battery when I was getting ready, but by the time I left it had gone down to 26 due to chatting with neighbors with the power on.

It started me off at 35% assist, but as I went up the first hill assist rose to 40% pretty quickly. I had down shifted and was peddling a bit hard. As I went along, peddling hard in progressively higher gears, the assist went up. For t(e last mile and a half or so I was at 100% assist and was going pretty fast. When I got close to home power was down to 12% and assist lowered. When and I still had 12% charge.

Stats for the actual ride were 5.5 miles, 162‘ elevation gain, and an average speed of 14.9 mph. Very close to my estimates when setting up.

I will definitely need to do some more testing on longer, more challenging rides, but it does seem to work. it can definitely help if you forgot to charge and need to tax the capacity to get home. Fun idea.
 
You must log in or register to reply here.

Similar threads

M
Turbo Vado 4.0 display units, how do I get miles per hour?
Replies
5
Views
2K
Te. S
Te. S
kenem
Should I buy an end of line Vado SL 4.0?
Replies
16
Views
767
kenem
kenem
Douglas Ruby
Vado SL and Vado SL 2 assist levels
2
Replies
20
Views
2K
Jeremy McCreary
Jeremy McCreary
popcornsally
Creo assist drops spontaneously
Replies
3
Views
2K
popcornsally
popcornsally
GuruUno
Mission Control-'Smart Control' has NOT been fixed! (7/9/23 UPDATE NOW FIXED!)
Replies
11
Views
2K
Stefan Mikes
Stefan Mikes
Back