New ultra dp.c18 display has tire size and diameter setting?

[Gr3]

I have a new ultra display has tire size and diameter setting? Tire setting only allows 26 or 27. Then after the next setting ask for tire diameter. My tires are 27.5x2.3 what would I enter for these settings? Also there seems to be no place to change assist levels. It's set to five I would like to change to nine. Thanks Ed

 

[TomD]

You can't change the Ultra version of the DPC-18 display to 10 PAS. With the Ultra version you get 5 Eco and 5 Sport PAS. Also, if you program the torque sensing it will only apply to Sport. I believe the Eco recipe is hard coded. If you want 10 PAS you need eggrider or a BBSHD display. My understanding is the BBSHD displays such as this work with the Ultra, but you lose the Eco settings:

the https://lunacycle.com/luna-mighty-mini-display-for-bbshd-and-bbs02-upgraded-500c/

 

[Gr3]

You can't change the Ultra version of the DPC-18 display to 10 PAS. With the Ultra version you get 5 Eco and 5 Sport PAS. Also, if you program the torque sensing it will only apply to Sport. I believe the Eco recipe is hard coded. If you want 10 PAS you need eggrider or a BBSHD display. My understanding is the BBSHD displays such as this work with the Ultra, but you lose the Eco settings:

the https://lunacycle.com/luna-mighty-mini-display-for-bbshd-and-bbs02-upgraded-500c/

Does it work with these new ultra's? The green plug isn't round any more.

 

[TomD]

Not the CANBUS motors if that's what you have.

 

[Gionnirocket]

Does it work with these new ultra's? The green plug isn't round any more.

That and a few other displays made by APT like the 860c come in both UART and CANBUS protocol

product

Smoothy is free HTML5 one-page template for multi-purpose that is based on responsive bootstrap framework.

www.aptdevelop.com

Look under TFT