Ho una NCM Moscow e dopo che ho cambiato, per due volte, il sensore di pedelata, la bicicletta dopo circa 10 minuti che funziona correttamente, si spegne. Sia lo schermo che il motore si spengono e non ricevo più assistenza alla pedalata. Come dicevo, prima che si spenga funziona tutto correttamente a parte la velocità che non viene più rilevata e trasmessa allo schermo. Il motore è un Bafang sul mozzo posteriore. Grazie in anticipo per le risposte.
I have an NCM Moscow, and after I replaced the pedal sensor twice, the bike shuts down after about 10 minutes of proper operation. Both the screen and the motor turn off, and I no longer receive pedal assistance. As I was saying, before it shuts down, everything works properly, except the speed, which is no longer detected and transmitted to the screen. The motor is a Bafang on the rear hub. Thanks in advance for your replies.
I have an NCM Moscow, and after I replaced the pedal sensor twice, the bike shuts down after about 10 minutes of proper operation. Both the screen and the motor turn off, and I no longer receive pedal assistance. As I was saying, before it shuts down, everything works properly, except the speed, which is no longer detected and transmitted to the screen. The motor is a Bafang on the rear hub. Thanks in advance for your replies.
