Frame tool bag for Superdelite

[amayers]

I'm interested in buying a small frame bag that will mount to the standard water bottle holder mounts on my 2021 Superdelite. However the area is pretty small, and I haven't found a frame bag that will fit there, and allow access to the factory lock. I plan to use the bag to hold a couple basic tools: allen wrenches, torx wrenches, pliers, knife and CO2 inflator. Does anyone have experience with a bag that will fit in this space?
Because I have a dropper post, a normal small seat bag doesn't really work.

 

[JVBulman]

There are quite a few options out there. Try searching "Bottle Cage Tool Roll."

 

[amayers]

I tried swapping the lock to the lower mounting point. When I did that, it gives me a little more length for a standard water bottle style tool box. Going to try https://www.amazon.com/gp/product/B081DH3STZ/ref=ox_sc_act_title_3?smid=A1BMYXFTS7NTJR&psc=1 as it seems like it should fit just right.

 

[Alaskan]

Abus makes a plastic/fiber strap to secure that lock holder. Try removing the holder and see how it fits on the back side of the seat tube, just above the rack attachment points. If it fits, contact ABUS USA and ask them to send you a couple of the straps. They sent them to me at no cost.
E-Mail: [email protected] Phone: 312-640-1111

worst case scenario just buy one of these for $25 as they come with two of the securing straps

ABUS Lock Accessories - Bracket For Bordo Granit 6500 Black SH/110 4003318780721 | eBay

ABUS Lock Accessories - Bracket For Bordo Granit 6500 Black SH/110.

www.ebay.com

​

That would open up your lower triangle for both a water bottle and a water bottle style tool holder.

 

[Alaskan]

MTB Bike Bicycle Tool Capsule Bag Box Waterproof Water Bottle Cage Holder | eBay

Find many great new & used options and get the best deals for MTB Bike Bicycle Tool Capsule Bag Box Waterproof Water Bottle Cage Holder at the best online prices at eBay! Free shipping for many products!

www.ebay.com

 

[Dallant]

Just get a large water bottle and put your tools in it?
Or you could strap a small tool kit under the rack.

 

[theemartymac]

I use one of these soft tool bags with one of these side-load cages on one of my bikes with limited cage space, and since it's a little soft and pliable, it works well.

Amazon.com : Epessa Bicycle Bike Storage Bag for Cycling, Bicycle Repair Tool Bag with Sealed Zipper for Bicycle Water Bottle Cage Outdoor Gift Father Boyfriend(for Water Bottle Cage) : Sports & Outdoors

Amazon.com : Epessa Bicycle Bike Storage Bag for Cycling, Bicycle Repair Tool Bag with Sealed Zipper for Bicycle Water Bottle Cage Outdoor Gift Father Boyfriend(for Water Bottle Cage) : Sports & Outdoors

www.amazon.com

Amazon.com : Lixada Water Bottle Cages Extra Lightweight Carbon Fiber Bicycle Bike Water Bottle Holder Cages Brackets : Sports & Outdoors

Amazon.com : Lixada Water Bottle Cages Extra Lightweight Carbon Fiber Bicycle Bike Water Bottle Holder Cages Brackets : Sports & Outdoors

www.amazon.com

 

[amayers]

Just get a large water bottle and put your tools in it?
Or you could strap a small tool kit under the rack.

Without relocating the lock a large water bottle won’t fit. A small one will though.

 

[theemartymac]

And if you go to that soft style tool roll, these pumps fit inside perfectly.

ROCKBROS Mini Bike Pump Portable Tire Pump Bicycle Air Pump 110 PSI Presta & Schrader Valve High Pressure for Ball Toy Pump with Mount Kit Repair Tool Kit : Amazon.ca: Sports & Outdoors

ROCKBROS Mini Bike Pump Portable Tire Pump Bicycle Air Pump 110 PSI Presta & Schrader Valve High Pressure for Ball Toy Pump with Mount Kit Repair Tool Kit : Amazon.ca: Sports & Outdoors

www.amazon.ca

 

[Alanzo]

I purchased a $16 cloth tool roll up from Menards and applied a clear rubber sealer to the outer layer. This was the only tool wrap I found to fit the length and width of the Delite rear rack. Was an affordable and easy solution to carry tool, tubes wallet, phone and pump in a minimal size rear rack bag.

 

[SteveBorough]

I swapped for the Ergon saddle (even though I have the GX option) and bought one of these saddle bags (see pic) that clips directly into the back of the seat. I store a wrench, micro ratchet, tire levers, patch kit, CO2 gas pump in it no problem. When I use dropper I "guide" my seat down with my rear rather than full weight plop as the bag just barely taps the rear rack when fully lowered.

 

[SteveBorough]

Anyone else notice from OP's pic, R&M swapped out the old horn (left side) and hi-beams (right side) buttons for a combined assembly on the left?

 

[amayers]

Anyone else notice from OP's pic, R&M swapped out the old horn (left side) and hi-beams (right side) buttons for a combined assembly on the left?

I ended up moving the horn/light assembly to the right. I could get it much closer to the grip that way.