Civante Upgrades
- Thread starter Greydog
- Start date
48t Wolf Tooth chainring on the stock spider. It’s basically geared similarly as a Wabash with better gear spacing.
Is this this one that you bought-
www.wolftoothcomponents.com
or
I have thought about going to a single crank but want a 50T for increased speed. I rarely use the smaller chain ring. How is the chain line with a single chain ring when using gears 1-3 and 7-10?
110 BCD Asymmetric 4-Bolt Chainrings for Shimano Cranks
110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Featuring Wide narrow Drop-Stop® tooth technolgy
www.wolftoothcomponents.com
or
I have thought about going to a single crank but want a 50T for increased speed. I rarely use the smaller chain ring. How is the chain line with a single chain ring when using gears 1-3 and 7-10?
Is this this one that you bought-
110 BCD Asymmetric 4-Bolt Chainrings for Shimano Cranks
110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Featuring Wide narrow Drop-Stop® tooth technolgy
or
I have thought about going to a single crank but want a 50T for increased speed. I rarely use the smaller chain ring. How is the chain line with a single chain ring when using gears 1-3 and 7-10?
This is the chainring I’m using.
110 BCD Gravel / CX / Road Chainrings
110 BCD 1x chainring sprocket gravel cyclocross cx road wide narrow wolf tooth drop stop
www.wolftoothcomponents.com
The shifting through all 12 gears is solid. A hacked 1x Tiagra? It may perform ok, but… my concern with using derailleurs that aren’t meant for 1x is that they won’t have any kind of clutch (or otherwise) mechanism which will help to stop chain drop (as well as a proper 1x front chainring).
I measured everything many times, researched, and then “cut once”. Turned out that basically the chainline for the large chainring (which was all I really used too, thus even more appeal for 1x) is within spec to go 1x. Also the Wolf Tooth chainring is a proper 1x compatible with SRAM AXS flattop chains. So I just needed the new front chainring and new chainring bolts… no spacers or anything.
Wow, you are using a 12 speed. I would have thought that a 12 speed chain would not hold up to the torque of an E-bike. Time will tell. I still have concerns about my 105 cassette and chain holding up. The tiagra cassette is all steel I believe but the 105 is not and it is a risk for teeth braking off or worse from what I have read.
Thanks for the info. I may convert over to a single chainring next year.
Thanks for the info. I may convert over to a single chainring next year.
I ride without assist 90% or more of the time. It’s essentially just boost for climbing, heavy headwinds or dragging my butt home when I’m tired on a long ride.
12 speed chains? They aren’t all equal. SRAM AXS Rival, Force and Red chains are different, such as hollow pins in the Red chain.
SRAM Red vs Force vs Rival AXS Chains (Weight, Material, and Price) - mr. MAMIL
Understand the differences between SRAM Red, Force and Rival AXS 12-speed chains.
mrmamil.com
That being said, we’ll see how it all holds up to wear and tear.
CasualGamerCC
New Member
- Region
- USA
Hi! New member here with a Civante I've had for a couple of years. I'm curious about replacing the fork since my bike has the creaking noise that I can't get rid of. I suppose my only options on that front are to either get a tapered fork that measures exactly the same or a straight one with an expansion plug and a crown race if it isn't integrated. Maybe new bearings as well if I can't get the same angle.
Greentween
Member
- Region
- USA
I posted here on EBR for what you need to swap to a carbon fork. FYI Civante is 11/8 to 11/4 tapered steerer. So odd duck for taper. 1 1/8 Straight with adapter crown race from crane creek.
LarryLegless
New Member
LarryLegless
New Member
For those that have been looking for replacement batteries, I went to China and got a Yamaha motor battery replacement that is 17 Ah, stock Yamaha battery is only 13 Ah, and for 1/3 the price of a stock one.
Works great and more battery capacity has extended my mileage range.
I ride in faster groups and need to run at High, and able to go average distance of 35 mile.
My average pace is 22+ MPH so it eats up capacity, but can still last the entire ride.
When I am going an extended distance 65+ miles I strp on a spare battery in a battery bag on top of the battery in use, using velcro straps.
When it is time to change the battery, I only need under 2 minutes.
Works great and more battery capacity has extended my mileage range.
I ride in faster groups and need to run at High, and able to go average distance of 35 mile.
My average pace is 22+ MPH so it eats up capacity, but can still last the entire ride.
When I am going an extended distance 65+ miles I strp on a spare battery in a battery bag on top of the battery in use, using velcro straps.
When it is time to change the battery, I only need under 2 minutes.
jabberwocky
Well-Known Member
Where are you finding batteries that work with Yamaha systems but aren't made by Yamaha? I didn't think that was actually possible.
LarryLegless
New Member
E Bike Lithium Battery
High quality Replacement Yamaha Down Tube Type E-Bike Battery 36V 13Ah 14.5Ah 17Ah 17.5Ah Battery from China, China's leading E Bike Lithium Battery product, with strict quality control E Bike Lithium Battery factories, producing high quality E Bike Lithium Battery products.
www.tl-battery.com
LarryLegless
New Member
wore out my second motor now at 8500 miles not as far as with first one that went 12.500 miles before it stopped working. , sure I'm out of warranty. Ordering replacement but like to like to find a way to repair the motor. Anybody else have their motor stop working?
maddilasrih
New Member
- Region
- USA
Hi, I'm a new Civante owner and just upgraded my fork to an ENVE AR Disc Fork because I got it for a steal, locally. This should work.
Similar threads
