Bolts to hold on kickstand

[jrlockman]

My kickstand on my 2019 Rad Rover broke off and they shipped me a new one, but did not include the two mounting bolts, does anyone know the exact size, thread, bolt type for those two bolts?

 

[legsofbeer]

My kickstand on my 2019 Rad Rover broke off and they shipped me a new one, but did not include the two mounting bolts, does anyone know the exact size, thread, bolt type for those two bolts?

Can't give you a complete answer, but I assume they are metric. Comparing with the M5 screws that fit the rear rack threaded sockets on the frame near the axle, the kickstand screw has a thicker diameter, so M6, 7, or 8. Length appears to be 23mm, but there's plenty of room to extend a couple extra mm if all you can find is 25mm length. Thread is significantly more coarse than the M5 screw.

 

[byunbee]

You can buy these bolts at Homedepot. Buy one of each size and return the ones that don’t fit.

 

[ExPatBrit]

M6

I just measured them and its 5.89mm

 

[byunbee]

M6

I just measured them and its 5.89mm

That makes sense. Most bike bolts for the frame are either M5 or M6.

 

[how]

My new rad rover step through arrived a month ago with a loose kick stand from a stripped bolt. I assume it was over tightened at the factory.
I just replaced it with a stainless steel M6 bolt that was a 1/4 " longer and put a locking nut on it with some locktight.