bike stand for maintenance for an ebike

B

badger505

New Member
I got a Lectric XP step thru ebike. I wanted to work on my bike to adjust the derailleur, tighten bolts, etc. but difficult to find a bike stand that will work with the weight of over 60 pounds or the width of the fat tires, at the axle 7 inches. I don't want to spend a lot of money just a stand to get the back wheel off the ground to adjust the derailleur and lube the chain.
signed budget minded cyclist
 
I found a bike stand on Amazon,
Ibera Easy Utility Bicycle Stand, Adjustable Height, Foldable Mechanic Repair Rack Bike Stand For Bicycle Storage, but not sure it will work with my ebike . Any thoughts??
 
I have both the Handlebar Jacks above and also a jackstand from Yaheetech. I think it was 60 or 70 bucks. I have used them both and they both work fine with the XP. I would recommend to remove the battery before hoisting it up on the Yaheetech although it would probably support the bike just fine...
 
badger505 said:
I found a bike stand on Amazon,
Ibera Easy Utility Bicycle Stand, Adjustable Height, Foldable Mechanic Repair Rack Bike Stand For Bicycle Storage, but not sure it will work with my ebike . Any thoughts??
Click to expand...

I bought one after you posted. It arrived yesterday. It supports my Specialized Turbo Levo. I had used kickstands (a no-no on mountain bikes) but they failed because of the weight of the bike was more than they were designed for.
 
Thank you for the feedback. Unfortunately I don't believe this utility bike stand will work with my Lectric XP step through ebike because the space between the chainstays is over 7 inches due to the fat tires and the weight of 63 pounds. I am going to see if a utility stand made for a scooter or motorcycle is available on the market. Most bike stands are intended for regular road or mountain bikes which are much lighter than ebikes.
 
It held my XP up no problem. I did remove the battery and seat post just to be safe but it was rock solid...
 
MikeDD said:
I bought one after you posted. It arrived yesterday. It supports my Specialized Turbo Levo. I had used kickstands (a no-no on mountain bikes) but they failed because of the weight of the bike was more than they were designed for.
Click to expand...
FYI-I have been using kickstands for 2 seasons for chain lubes, etc. No issues to report. My kickstands are mounted on the rear part of the chainstays. Tilting the bike slightly allows me easy access while spinning. The Ibera stand referenced above looks like another good candidate for minor maintenance.
 
I've never owned a bike stand. Always hung my bikes from the garage door tracks using tie down straps. One hook in the track and wrap the other around the frame. Works great.

1602031181068.png
1602031256565.png
 

Grand PitStop Motorcycle Wheel cleaning stand - Paddock Stand Replacement - Wheel Roller Stand for tire cleaning & chain lubrication - GRoller (Medium (Bikes < 485 lb & Tyre width <180 mm))​

Visit the GRAND PITSTOP Store
I found this product on Amazon. I believe this will work for my needs to get the back wheel off the ground to lube the chain, check tires and adjust the derailleur. It is really cheap and compact. My ebike has 4 inch fat tires like you might find on a motorcycle so I believe this will work.
 
badger505 said:

Grand PitStop Motorcycle Wheel cleaning stand - Paddock Stand Replacement - Wheel Roller Stand for tire cleaning & chain lubrication -​

GRoller (Medium (Bikes < 485 lb & Tyre width <180 mm))​

Visit the GRAND PITSTOP Store
I found this product on Amazon. I believe this will work for my needs to get the back wheel off the ground to lube the chain, check tires and adjust the derailleur.
It is really cheap and compact. My ebike has 4 inch fat tires like you might find on a motorcycle so I believe this will work.
Click to expand...
Interesting idea... ;)

1602283084211.png
 
badger505 said:
I found a bike stand on Amazon,
Ibera Easy Utility Bicycle Stand, Adjustable Height, Foldable Mechanic Repair Rack Bike Stand For Bicycle Storage, but not sure it will work with my ebike . Any thoughts??
Click to expand...

I bought that and returned it. My bike weighs 50 pounds. It was not stable at all. Went with the Topeak tuneup stand X. It's expensive for what it is, and not perfect, but works just fine and I am quite satisfied.
 
ki11a said:
If you are worried about weight there are pretty hefty Heavy Duty Rear Wheel Motorcycle Stands that are adjustable and will be more than enough to support our ebikes with weight to spare.
Click to expand...
I have the Handlebar Jacks for road/trailside repairs and just ordered the heavy-duty stand for my Yamaha mid-drive... if it's good enough for Motos, it's good enough for my EMTB. ;)

Amazon.com: SUNCOO Sport Bike Motorcycle Wheel Stands Fork Universal Swingarm Spool Paddock Lift Combo Set for Motorbike Maintenance Fits Honda Yamaha Suzuki BMW (L（Rear）): Automotive

Buy SUNCOO Sport Bike Motorcycle Wheel Stands Fork Universal Swingarm Spool Paddock Lift Combo Set for Motorbike Maintenance Fits Honda Yamaha Suzuki BMW (L（Rear）): Stands - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com

1602293204246.png
 
bikeman242 said:
I bought that and returned it. My bike weighs 50 pounds. It was not stable at all. Went with the Topeak tuneup stand X. It's expensive for what it is, and not perfect, but works just fine and I am quite satisfied.
Click to expand...
Where did you get the Topeak tune up stand X and how much did it cost?
 
badger505 said:

Grand PitStop Motorcycle Wheel cleaning stand - Paddock Stand Replacement - Wheel Roller Stand for tire cleaning & chain lubrication - GRoller (Medium (Bikes < 485 lb & Tyre width <180 mm))​

Visit the GRAND PITSTOP Store
I found this product on Amazon. I believe this will work for my needs to get the back wheel off the ground to lube the chain, check tires and adjust the derailleur. It is really cheap and compact. My ebike has 4 inch fat tires like you might find on a motorcycle so I believe this will work.
Click to expand...
Thanks for the heads up. Another handy tool to use with solid durability. Cheers! ;)
 
FlatSix911 said:
I have the Handlebar Jacks for road/trailside repairs and just ordered the heavy-duty stand for my Yamaha mid-drive... if it's good enough for Motos, it's good enough for my EMTB. ;)

Amazon.com: SUNCOO Sport Bike Motorcycle Wheel Stands Fork Universal Swingarm Spool Paddock Lift Combo Set for Motorbike Maintenance Fits Honda Yamaha Suzuki BMW (L（Rear）): Automotive

Buy SUNCOO Sport Bike Motorcycle Wheel Stands Fork Universal Swingarm Spool Paddock Lift Combo Set for Motorbike Maintenance Fits Honda Yamaha Suzuki BMW (L（Rear）): Stands - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com

View attachment 68161
Click to expand...
Oh yeah, another nice solid option. Like the mobility of this unit as well. Good call!
 
You must log in or register to reply here.

Similar threads

ramrezz425
Maintenance stand quandary...
Replies
14
Views
353
PCeBiker
PCeBiker
A Touch of Class
Lectric eBikes Announces End To International Shipping, Effectively Abandoning International Customers
2
Replies
23
Views
2K
A Touch of Class
A Touch of Class
M
Bike Repair Stand
Replies
3
Views
1K
Urbancowboy
Urbancowboy
bigcanoe
Help choosing a bike for fun and exercise?
Replies
10
Views
971
Doom1
D
B
Portola Thread
Replies
8
Views
1K
RCP
RCP
Back