Air compressor

[fooferdoggie]

Ya I hear you I could not find a short hose so I had to get this for now. but for my 1.5" tires it was plenty it seated the bead fine big tires I can see it being a issue.

 

[rtp]

The issue with smaller compressors is mostly down to the tank size - the motors aren't high powered enough to use pressure 'straight from the motor' so having a larger storage tank can help with things like seating beads and the like. Always let the compressor run, and set the pressure on the higher side to let it fill/pressurize the tank...you can always regulate the pressure down if you really need to, but you want to 'get the job done' (e.g. popping the bead on) without the motor kicking in if at all possible. Some smaller compressors that seem to 'not get the job done' may be able to if you can add another tank into the system - Harbor Freight, Auto Parts stores etc. all have tanks like 'air storage tanks' meant for like 'emergency air fills' - just a tank and hose without a compressor that you'd fill up once, then bring to where you need to fill tires, and these can be converted to add/expand your small compressor storage with a couple of fittings (use hardlines/no quick connects for tank expansion so you don't leak air).

Besides the 80gal 2 stage compressor, I've got a crappy small Kobalt which is smaller than I'd ever want from a 'small' compressor as I doubt it can even drive a brad nailer reasonably, but the tank is big enough I've used it without issues popping beads on and the like, as long as I let the compressor fill the tank and cut off before using the air.

I sucked it up and bought the Park Tool ($$$$), while I have a cheapie digital China Schrader-only filler I mostly use for the cars.

 

[rtp]

With the exception of the big security bit set, yeah, HF tools are junk. Some are even dangerous. I bought what was their top of the line floor jack a decade or so ago. It dropped the car before I could get stands under it. This is the one I recommend if you're a catalytic converter thief, however

I had one of their T-35 T-handles break and throw shards of metal into my glasses. One piece actually stuck. Their zipties start to degrade shortly after you install them. I could probably go on, but you get the point, right? If it can hurt or kill you, maybe spend a little more and buy decent tools.

Good tools are worth it. Buy once, cry once. Pass them down to your grandchildren.

I've occasionally bought HF for 'disposable' tools, or ones truly one to few time usage only. Things like a spackle/drywall hawk are tough to screw up, for example, and I have one of their orbital polishers I re-greased and use for car polishing/buffing. I have a couple of their 'wooden workbenches' which I'm sure are made for them by <some other company>, which I've reinforced and glued, and holds up well for a reloading and workbench. I think the Aluminum 'race jack' I have may have come from them like over a decade back and it's fine, but it was an expensive purchase IIRC, like $200 or more, and I don't lift anything over 1.5 tons or so with it. I think I also have an ancient big mitre saw from them - it's zero bells and whistles, but has been going for 15 years for sporadic use.

I think some of their higher $ items may be ok 'for the money,' but their habit of replacing models perpetually, no parts availability for most things (or until they randomly make a new model 6 months later). A big nope to their battery powered tools of any of their lines - it's interesting they're trying to make their 'higher end' lineups including for battery powered tools ("Hercules" for electric or 'Predator' for crap engines), but their reputation vs price vs lack of parts makes it a big nope for me (Makita for electric power tools, although Milwaukee and DeWalt are fine alternatives in general).

So pretty much - informed purchasing their on some higher end stuff may be ok - their higher end toolbox line is reasonably ok, but know what you're getting into and expect the worst.
Their hand tools, bench grinders, even bench vices and the like - no thanks.

 

[rtp]

With the exception of the big security bit set, yeah, HF tools are junk. Some are even dangerous. I bought what was their top of the line floor jack a decade or so ago. It dropped the car before I could get stands under it. This is the one I recommend if you're a catalytic converter thief, however

I had one of their T-35 T-handles break and throw shards of metal into my glasses. One piece actually stuck. Their zipties start to degrade shortly after you install them. I could probably go on, but you get the point, right? If it can hurt or kill you, maybe spend a little more and buy decent tools.

Good tools are worth it. Buy once, cry once. Pass them down to your grandchildren.

Doh - the AL 'race jack' and a (wooden) workbench are among the only 'quality' HF buys I've had. It's surisingly difficult to find a quality jack nowadays...

Bits and hand tools - completely agree. Sadly, with the Craftsman/Sears mess (there are kind of now two 'Craftsman' tools), Craftsman seems to no longer even be viable as a 'good enough' option. I think the 'Lowes Craftsman' is better than the crap 'Sears Craftsman' now, but last Xmas I bought myself a bunch of sale cases full of bits, and the Phillips #2 bit snap on me on first (lightweight) use. Have since gone back to Makita and DeWalt even for bits now.. $ but pay once, or at least a lot less frequently.

 

[pmcdonald]

Both those compressors have a long thin coiled hose - get yourself a nice short thick hose so you can dump a lot of air quickly when seating tubeless tyres.

Cheers! That explains why it felt a little hamstrung seating. I saw plenty around, I'll grab one next time I'm over that way