Search results

Anyone know how, if it's possible, to get an older version of the M600 FC 3.2 controller? One that will run 14.6 or 46.8, for example? Thanks.

Anyone have any recent experience with this company? It seems like they were terrible to work with in the past. Their site says stuff that seems to address previous issues... 5 weeks to return (they pay shipping), and a good warranty but I'd be concerned they'd just ghost me if I tried to claim...

Hi have an M600 with a shift sensor. It blinks red when idle and when I shift is blinks green. Even though it seems to detect the shift, the motor does not stop. I was thinking of changing the shift sensor or trying to clean it but not sure that makes sense given it already blinks green when the...

Hello, I have a bike with an RST Renegade fork. Recently I noticed there seems to be some fluid slowly seeping out from near the rebound adjust at the bottom of the fork. The adjuster is not turning all that easily either. I can't seem to find a ton online about these forks. Any thoughts on...

Looking to custom build a bike primarily for local use, but also some touring. Been throwing around the M500/M510 and M600 and have been leaning towards the M600 because we want something that can handle hills well and it has the higher 45kmh limit (I believe 500/510 top off at 25). With this...

This is more of a dream than a reality, at this point, but it's been something I've been curious about the answer to. If I were to ever customize some bikes on Alibaba and resell in the US, what kind of liability do I have in case of a defect (ie a battery burning up)? I know that's a loaded...

I've bled Tektro Dorado brakes before and used the method where you put a syringe on the port up by the brake lever and one at the port by the caliper. I had no issues with it. I also used the cup at the top to try to get any little bit of extra air out and again on those brakes, no issues...

Looking for a smaller wheelset for a fatbike for summer use. 27.5" wheels. I have 197mm rear spacing, 150mm front. 12mm thru-axle on the rear and 15 on the front. Ideally 40mm ish internal width, but can be flexible. Thanks!

Anyone know what kind of grease is in the Das Kit motors? I have over 2k miles on mine and I was going to open it up to just check on it. I want to have some grease handy though for when I do that. I keep seeing things about white lithium as kind of being the basic grease which is kind of...

Hi, I just put a KT 22a sinewave controller on an ebike. It's working out pretty well. I think I got most or all of the settings right. Seems significantly better than the controller I replaced. I'm trying to figure out what to expect with this "Torque Imitation" aspect of it though. I've only...

Anyone know the max wattage light that can be connected to the light output wire on the Moscow (Plus)? The wires look to be wired into the mount directly, so it's likely 48v output, but not sure the max wattage that can be output. I guess the limit would be whatever the wires can handle...

This may be a really dumb question, but is a KT Waterproof controller, with waterproof connectors, actually waterproof. I'm not talking the connectors. I'm talking the box/circuitry. I am planning an upgrade that I'm doing to an NCM Moscow+. The controller for that bike sits near the bottom...

This is probably normal but figured I'd ask. I have a bike with a Bafang Ultra. It only has about 150 miles on it. When I stop pedaling and the assist disengages, I hear a quick faint spinning noise from the motor. This happens every time. It only lasts a second or so and just sounds like a gear...

Has anyone swapped out the display and controller for Bafang? I think the motor connector is the same, just not sure if the pins line up with what Bafang expects? After a few thousand miles, there's a few annoyances I'd like to try to iron out that I think a Bafang setup will solve but I prefer...

Hello! We recently purchased a Pace 500 for a family member and he loves it. It got me thinking to check the Aventon site since I'm looking for a rack that will fit my fat bike. I'm wondering if one of the Aventure racks will fit. It looks like there are a few different sizes. Does anyone know...

Hello, New owner of a bike with an Ultra. I read somewhere setting the speed limit to 22mph lowers the power draw to 750w. Did that and it seems to. At least the display maxes out at 750w. What I'm trying to figure out is if that changes the power curve at all too. So, for example, lets say I'm...

Has anyone every used the Luna advanced charger on an NCM battery? It charges, but if you set it to stop at 80% it cycles on and off every few seconds once it hits 80%. I don't think this has anything to do with the battery since it can definitely tell what the battery level is if it shuts off...

I think I'm probably overthinking this, but if there is one thing I want to overthink, it's whether or not a battery is going to catch fire. I ordered a custom build bike from a company in China. They have been REALLY good to work with, super responsive, knowledgable, etc. They also have great...

Hello, I have a custom fat bike with a Bafang Ultra that should be coming in early this fall. I have a hub drive MTB now and read a lot about the drivetrain wear with mid-drive, let alone the higher powered Bafang Ultra powered system. Does anyone have a recommendation for a chain? I typically...

Hi, I have a Moscow+ that's a little more than a year old. I got it with the 16Ah battery. I'm planning on getting a second bike with a Bafang Ultra that uses the same Dorado battery type but the controller is rated at, I believe, 30A, although it might be limited to 25A. The new bike comes...