Search results

Your welcome. I figured it would be nice to dive deep into this project and get all the highly technical info out here. The controller is brand new so there is nothing wrong with it. It normally would not be able to connect to the Eggrider because the cables out there are not plug and play in...

So generally everything went very well. These are the connections to the board. GND = GND 48V = B+ TX = TX RX = RX POWER LOCK = VK+ The eggrider powers up connects to Bluetooth and displays the right information. The control is powered on. Bafang Protocol is automatically found and paired. I...

Well good news is that it was the right wire. So all the wires are connected now. I'm getting a fault but the eggrider did seem to automatically choose bafang as the protocol so I believe it's communicating ok. I probably need to get the brake throttle and pas hooked up and then maybe it wont...

I'm pretty sure it's got to connect to VK+. You can see that in the picture the VK+. The board has 3 V markings. VB+ VB- = Volts Battery. So hopefully this one marked V is 48 volts or else i am about to fry this thing. But looking at all the wires that go to the stock controller plug you can...

Ok so heres where im at. I got the Eggrider connected. And It turns on just fine. But there is no communication because the controller is not turned on yet because i do not have Power Lock wire connected. I'm not quite sure where to connect it. With the controller plugged in some of the traces...

Alright I got my eggrider today. Which is not compatible with the controller I bought. Eggrider said the controller is not compatible. I believe it is not plug and play but If you make your own cable or solder to the controller board I think it will work. The connections are marked on the...

Yea money. I've dumped a lot of it lately. I like the Bafang. From what I see the quality is pretty good. Far as I know direct drive hubs are a lot bigger. Anyway I have the Bafang and I have the controller + a Eggrider and also I have a Tronix 250R VESC on the way. It is supposed to put out a...

Yea Idk. One time i was not logged in and it said something about sales and contacting the poster and that you couldnt make comments. Just confused me. But I did start another thread with the bafang G062 Info and models and such.

This is the gear size that is in the G062-1000W. It is a little thinner but it would work. Any gears to this specification will fit. The Modulus is 1.25 and 36 teeth. https://www.huco.com/shop/power-transmission/gears/spur-gears/22603600...

These are the gears I ordered. I think there a good replacement. They should be a direct drop in. I'm pretty sure. I have to measure the stock gears when I get home. I'm at a memorial day picnic right now. But I did already order 2 sets of these. It takes a couple weeks to get here. Nope its...

So lets talk about the gears. The drive gear on the rotor is 18T. The 3 spur gears on the clutch are 36T The Large gear in the Wheel Hub is 90T The overall gear ratio is 5:1. The motor makes 5 revolutions per 1 revolution of the Wheel. I am shifting gears....LOL and switching to model the...

Well I have read a fair amount of post where people have trashed the nylon gears and the clutch. But for sure you have to be pushing it. If your running 48v or 52v I believe there is no problems. I don't want to go steel on steel because of noise so I ordered a set of Copper Gears. I don't know...

Since I started working on the G0602-1000W re design I figured you guys might like to see the bike it is going on. EBYCCO GT2.0 48V 10Ah 750W 20 inch 4 inch Fat Tires Electric Bicycle 150KG Max Load Double Disc Brake Electric Bike Specifications: Brand EBYCCO Model EB-055 Material Aluminum...

This is my hobby and this is what I do for fun. I am a Mechanical Engineer / CNC Programmer-Machinist. So I have access to all the tools required and the knowledge to use them. Why not? Why not make improvements and Test stuff. I don't want to just ride. I want to know how every part of my bike...

A little more info. The Bearing is Part# 6003RS or TIMKEN Part Number 6003-2RS The Seal is TIMKEN Part Number 481481 I would use quality bearings and seals like Timken. The 5 Case Screws are M4 by 10mm length under the head. I'm going to use high quality Stainless Steel Screws. Ok I know...

Yes the little holes are magnets. I believe there used to read the speed if your using a stock bafang controller? Your not running stock so you don't need them. I have a VESC coming instead of a controller. It is supposed to put out impressive power.

I will try to keep everything here as I go through this project. My main goal is to re design the G062 to be Liquid Cooled. I have the stock Bafang Case Modeled. If anyone needs any info on it let me know.

Mann I think it won't let you guys reply to this post. I'm gonna start a new one. They got this wrong. I want to go through the Bafang motor design with you guys so lets start a thread on that. Just look for that one i guess.

Damm, Eggrider just messaged me back that it's not compatible. I don't see why it wouldn't be though. I wonder if they just don't know the controller so they are unsure. If there not sure they are gonna say it's not compatible. I already ordered it so it's on the way. The control will have...

Alright long story short lets cut to the chase. I just got this motor today and I gotta say from the outside appearance the Quality is outstanding. Thats great cause it's hard to polish a turd. One thing I like so far is most of the features on the case can easily be machined. Bottom line is...