Search results

I have a Fat Tire E-Bike running 26 x 4.0" tubed street tires @ 22psi & 24psi Front & Rear. Also, in 3yrs and 15,000miles, I've only got one slow leak up front. All my flats happen on the Rear Tire. This RipCurrent S weighs in @ 75lbs. Add my pannier, two other accessory bags, a pump, lights...

Good Job on gettin the Video done without tipping over! There was a very similar thread posted about three months ago with the same issue on a similar, if not the identical, Juiced Bike. It's a damaged Planetary Gearset within the motor making all that noise. Planetary Gearboxes are compact...

Hey Zippy, just get one of these; https://www.juicedbikes.com/products/new-ripcurrent-s : )

That's Very Good News! It's good to know that Juiced has addressed the problem, as least with a proven Brake System Replacement. And, it's good to know the Logan's & Tektro's are interchangeable. I noticed that Juiced has switched from Shimano Shifting equipment to some Brand I've not heard of...

Hey ZipOnator! SO, last time we've crossed paths within these Forum's, you'd just acquired a New Step-Thru RipCurrent S, the pretty Blue one if I remember right, nice color. And now I see you've got 3 of these Beasty Fat Bikes. Did you spring for one of these ...

Yea, been through the Juiced Customer Service Ringer pretty hard myself. It's a shame because one thing I learned in advertising is that you can't buy better than "word of mouth" testimonials as an advertising source. And, thanks to Social Media, people are gonna find out quickly weather your...

So, I've got a 2019 RipCurrent S with Juiced installed Tektro 180mm HD-E350's Front & Rear. I'm retired and ride this bike Way Too Much. After a little over 2.5 seasons of riding I'd accumulated over 12,000 miles on this E-Bike and had worn my 180mm rotors to below minimums. I went through...

I've contacted these guys and posted a thread asking peoples opinion of their services. All Good reports and my experience has shown proven positive and helpful. They likely know weather you should cut the Blue wire or the Red wire ! : / Just kidding, but I'd guess they have an answer to your...

Looked at the Rad Runner2 specs and Yea, it's a Utility E-Bike to the core, Good Value too! It reminded me that this type of E-Bike was a serious consideration for my first E-Bike purchase. Rad Runner has some serious competition too, which is a Good thing. Competition tends to bring out better...

I almost bought a HyperScorpion for one reason only . . . It came with two 19Ah, 52v batteries when, at the time, this battery was listed at Juiced for $1200 bucks each. When I'd purchased my RipCurrent S in Nov 2019, a spare 19Ah battery was $600, which I thought was high then (THE reason I...

I know they don't manufacture the E-Bikes Tora Harris has designed. They're made (mostly) in China. One of the reasons I chose Juiced in the first place is that Tora Harris is a Chinese/American. He's kind of the "Jimmy Hendrix" of the E-Bike world in that one of his Parents is Chinese, and...

Thats more than reasonable, I thought the bike would have been newer but thinking about it, 68 miles in 2 yrs may not be far from average for most. What makes this even more note worthy is that Juiced doesn't manufacture the Motor. If it's a Bafang, any warranty questions kind of point their...

Nice! . . I'd bet Dollars to Doughnuts that the Planetary gears are making that noise. I've worked on this type of drive system many times, but not this particular motor. If it's a Bafang motor it's likely to have Delrin Plastic gears, meaning it will go to pieces slowly ( and possibly continue...

Thx Court, it's looking as if I may not have saved this Draft Review correctly or it may be tucked away within a Thread Reply (if that's possible). It turns out there aren't that many Forum's I'd have tried to save this Review, so finding it shouldn't be difficult. If I did save it correctly, I...

Thx for the Help on this Tom. I can answer YES to the first two questions. I didn't think it mattered which Forum page I'd started this Review on. I Did save it properly according to your qualifying questions, but I guess I thought I could locate a saved draft from my login page since it wasn't...

Hey EBR, I started a 10K mile review of the Juiced Bikes RipCurrent S about ten days ago. It was rather detailed and a bit lengthy, so I don't want to start over, just finish it. Where do I find Saved Drafts I've started. This one seems to have disappeared into the Either. It's also possible...

Yea, this guy says for a little over the $200 bucks (the cost of the Original Cadence Sensor issue) he can make this a "nice" bike for $700+ dollars and exclaims "We just replaced the Motor"! Then he proclaims there's no reason for a "Hub" drive motor except to save money. "Mid Drive" motors...

As I was saying, I've got 10K+ (10,000 miles) on this RipCurrent S and Motor in 2 seasons of riding. I'm in the Pacific NorthWest & it rains a Lot here. I may get 9 months of riding per season at most. I bought the RCS in Nov 2019 and didn't start with a tracking App until I'd put at least...

You've probably seen the Grin Technologies Promo Vid for this GMAC Motor already, but here's a link anyways; Here's another Grin Tech link for the available "Kits"; https://ebikes.ca/product-info/grin-kits.html I'm considering the BAFANG G60 Rear Fat Bike kit for my Ripcurrent S. For...

Appreciate the inputs . . . got a few tork wenches that read in nano newtonz & foot Lubs plus I've watched a YT vid or two on the "Freewheel" vs the other kind of casette'z . . . which is what I think this HG2000-Hyperglided+OptislickedOutCassette is. Sounds like my generic tool will work for...