Search results

glad i could help. I wouldnt mind getting one myself. When i first started ebiking about 5 months ago i had a small cheap coin battery operated one that i rigged to the helmet and loved it on blink mode but it died about 2 months into my biking adventures.

sorry when i said hook it all up to the controller, i meant the motorcycle switch that controls all of the stuff, not the controller on the bike. I fully understand this is 100% separate from the bike battery, that is the goal as to keep it separate from the bike. I think the 1.8aH is a little...

i just looked at the dashcam manual, looks like i would be good with everything 12v, it states the following: Working Voltage DC 5V Working Current 1000mA~1100mA (DC 5V) • Connect the Red wire to the positive 12VDC source that is always on. • Connect the White wire to a positive 12VDC source...

wow interesting, thanks for the reply. I have a few ryobi one+ 18v 1.3ah batteries. If i could use those that would be great. I found another switch, 12v, that someone supplied diagrams in the review section: https://www.amazon.com/Motorcycle-Handlebar-Headlight-Signal-Switch/dp/B07JN59Q3W...

would i be able to hook up something like this to a battery easily? I don't understand where i would plug in the adapters? Could i purchase something to plug it into and the lights into? https://www.amazon.com/Motorcycle-Switches-Headlight-Handlebar-Controller/dp/B08DR9TZVZ/

lots of great options, thanks guys. Those waterproof socks kind of make my brain hurt though, seems impossible. So they really work, and i guess you just feel slightly damp feeling from the wet shoes? I will keep an eye out for them cheaply on amazon, thanks for that. Also i will look into...

Hello all, this is my first year riding electric bike fully replacing my car, so i ride 20 miles a day for work and various errands, enjoyment. As winter appraoches i find myself in the dark a lot, and i ride on side streets and the road 50% of the time. I have been using various battery...

just by googling i think this might be the light. Can't comment on the quality of it.. https://www.rei.com/product/122367/light-motion-vis-pro-helmet-bike-light

I am going to start another thread on this, but if someone has any suggestions i am all ears. My goal is to have headlights and turn signals, similar to a motorcycle, hooked up to a seperate battery than my bike's main battery. I have the front/rear camera that can be powered by USB cable or...

I have not been able to get into the IGH yet, because i didn't have the channel lock to remove the IGH and open it up, so I finished the major cleaning, replaced both chains and reassembled everything. Seems to be working pretty well, did a short ride last night. Seemed better and i will try to...

Yeah i think i need to just wear my boots and find some good pants with 36" inseam that are certainly waterproof.

good suggestion, the gloves i was wearing were walmart gloves haha!

thanks for all the replies! I have a pair of waterproof boots i got from LL Bean at a recent sale and i should have worn them, i decided on wearing the shoes because i knew i was going to be laying down on my side for a procedure and might have my shoes on the table/bed (nerve block injection...

Hey all, i had to ride to a doctors appointment to get a procedure done on my neck, was pretty wild riding for over 30 minutes and not a single person was on the bike path, i was wondering if i had gone fully crazy. Anyways the ride was pretty fun, my rain jacket and water resistant pants held...

Also i ordered the 16 tooth sprocket you suggested but it might take awhile to get here. do you think i should replace the front sprocket? I think it's currently 32 tooth (maybe 33). Looks slightly beat up. Also here is the actual motor. There is a rubberband to the left that looks good...

cool i ordered the oil and already have the park tool grease, and i decided on getting a slim channel lock tool from amazon that a lot of people mentioned using for bikes, since it was cheaper than buying a bunch of different sized ones. Thanks for the suggestions.

Hello just curious if you can tell me a good SAE number for the mobile one. Looking up shimano oil and it was $70 to $100 which is insane. Thanks!

I have the bike up on a stand and i removed all covers, removed the 2 chains and i cleaned the cogs and rollers as well as i could. I took the wheel off and now just deciding if i should do a complete tear down of the IGH by following the video below and clean all the individual parts, and...

i found this guide, might try to follow along. https://thegoldenwrench.blogspot.com/2011/01/servicing-of-internally-geared-hub.html just have to start ordering things, like oil, the cog, and container to hold the IGH while lubing. Also can i use normal bike grease ( i have park tools bike...

I just wanted to share this video of this guy Dom Whiting, who plays drum and base music in england while riding around on his bike. He has a huge following and the videos are pretty amazing to watch not just for the idea of a guy on a bike being a mobil DJ but the music is pretty good. Check...