Gionnirocket's latest activity
-
Gionnirocket replied to the thread Battery Display Settings.With experience they could probably calibrate one more accurately with just the voltage and knowing the battery capacity. With the... -
Gionnirocket reacted to Intex's post in the thread Need NEW conversion motor for Kalkoff E-bike with
Like.
I must have not explained correctly. I was quoted $500 to replace the old LiIon batterys 18650?? with new ones, so I told them to hold... -
This is why we have peer review. They have Samsung 35e cells with super premium BMS. Never run it all the way into the ground. And...
-
Gionnirocket replied to the thread Battery Display Settings.Using the Samsung cell as an example... 39v is approximately 22%, which is fine as a LV shut down. That's what I have my controller set...
-
All three of my 48V batteries are Fricken Useless below 42 Volts. The voltage sag keeps shutting them down even with as low as 150W...
-
Gionnirocket replied to the thread Battery Display Settings.I'd be surprised if even a double super ultra premium BMS will allow a lower output voltage of 39v. ymmv
-
Gionnirocket replied to the thread Need NEW conversion motor for Kalkoff E-bike.If nostalgia is really important... Then keeping the motor and replacing the consumable battery is the only way to keep it authentic...
-
Gionnirocket replied to the thread Battery Display Settings.How are they different? I assume they are using standard name brand cells and this is a function of a typical cell. Allowing the end...
-
Gionnirocket replied to the thread Battery Display Settings.36v is too low for 0. Though it is close to actual battery voltage range, taking it that low is harmful and can possibly cause...
-
Gionnirocket replied to the thread Need NEW conversion motor for Kalkoff E-bike.Replace/rebuild the battery or scrap the whole thing. Trying to fit a different motor to that bike frame is a clusterfuck waiting to happen.
-
Gionnirocket replied to the thread Anybody else oil a chainsaw manually?.. . . and always with a common sense solution
-
-
Gionnirocket reacted to 6zfshdb's post in the thread Anybody else oil a chainsaw manually? with Like.
I also had an old Craftsman saw with a thumb oil pump. My neighbor had the same saw but paid extra for the auto oil feature. He had...
-
Gionnirocket replied to the thread Clicking Noise At My Bike Rear Wheel.See if you have a baseball card clothes pinned to the seat stay 🙃
-
Gionnirocket replied to the thread California tries to limit to 250 watt???.That's discrimination! My grandfather has always been a power hound and he loves his Surron 🙃
-
Gionnirocket replied to the thread Lady cyclist killed in Davis involving juvenile on ebike...on the bike path..I'm sure they're far superior as far as sound quality... but again I really appreciate the easily manipulated buttons and no phone...
